Smoke Systems
SS Z072

Tank Station Pro Set with FuelStation, FuelSwitch & FuelSensor

Tank Station Pro Set with FuelStation, FuelSwitch & FuelSensor

In Stock
$259.99
Item Qualifies for Free Ground Freight (48 States) on Orders Over $150

Tank Station Pro Set with FuelStation Control Panel, FuelSwitch & FuelSensor, from Smoke Systems

The tank station is used for refueling and defueling an aircraft. In addition, you need any 6V pump and a 2S Lipo battery. The tank process starts and stops with the + and - buttons.

The FuelStation is the control panel of the fuel station. The battery (2s LiPo), the pump and, if used, the FuelSwitch are connected to the fuel station (The required plugs are included).

Any 6V (DC) pump can be used as a pump. The maximum current is limited to 3A, the pump is switched off in the event of an overload. Power is supplied by a 2S LiPo battery. Despite the very low quiescent current, the battery should be removed at the end of a day's flight.

Refueling and defueling is easy using the buttons (plus and minus). To refuel, press the (+) button once. The tank progress is stopped manually if the (+) button is pressed again. (Defuel accordingly). The FuelSwitch is used for the automatic shutdown.

  • Dimension: 65 x 35 x 12 mm
  • Voltage: 7 – 12 Volt
  • Weight: 42g (incl. Kabel)
  • Current: max. 3A (protected); min. 13mA (unplug the battery)