OS Engines
OS MG0548

.46AXII ABL Glow Single

.46AXII ABL Glow Single

$201.99
Item Qualifies for Free Ground Freight (48 States) on Orders Over $150

.46AXII ABL Glow Single with Muffler, by OS Engines

This is the O.S. Max .46AXII ABL BB Model Airplane Engine with Muffler. Ideally suited to sport and aerobatic aircraft. Advanced Bi-Metallic Liner. This process uses a double layer of plating material rather than one thick layer. This helps the metal to bond to the cylinder and is more durable. Also, the plating process is more consistent, resulting in a more precise fit between piston and sleeve for better compression, longer life.

  • E-3071 Power Box muffler with squared-off shape enables it to fit into a variety of cowls
  • 40K carburetor with rear angled needle valve for added safety
  • Ball bearing-supported crankshaft
  • Two-year limited warranty

INCLUDES: O.S. Max .46AXII ABL BB model airplane engine w/muffler, A3 glow plug, (2) 3mm x 35mm cap head muffler screws, extension cable for remote needle, 3mm x 35mm cap head muffler screws, warranty sheet, decal sheet, illustrated instruction manual

REQUIRES: Fuel containing 5%-20% nitromethane with at least 16% lubricant

  • Displacement: 0.455 cu in (7.45cc)
  • Bore: 0.866" (22mm)
  • Stroke: 0.772" (19.6mm)
  • Practical RPM: 2000-17000
  • Power Output: 1.65PS, 1.67HP/16000 RPM
  • Weight: 13.3oz (378g) without muffler
  • Recommended Propellers: 10.5x6, 11x6-8, 12x6-7, use 10x6 for break-in
  • Crankshaft Size: 1/4-28
  • Distance from remote needle to end of crankshaft: 4.7" (119.4mm)
  • Distance from center of engine to drive hub: 2.4" (61mm)
  • Distance from center of engine to end of crankshaft: 3.4" (87.6mm)
  • Distance/crankshaft center to muffler exhaust outlet: 3.9" (100.5mm)
  • Height from crankcase bottom to top of cylinder head: 3.3" (85.2mm)
  • Height/crankshaft center to top of cylinder head: 2.6" (67.4mm)
  • Width including mounting tabs: 2" (50.8mm)
  • Width not including mounting tabs: 1.4" (35.6mm)
  • Width/mounting hole centers same side: .69" (17.5mm)
  • Width/mounting hole centers opposite side: 1.7" (44mm)
  • Diameter of muffler body: 1.5" (38.1mm)
  • Angle of muffler in relation to engine: 4° Carburetor Settings
  • Needle Valve: 1½ to 2 turns out from closed position