SP-6 Magnetometer (Compass sensor)

The following AHRS sensors can be connected to the Enigma/Voyager/Odyssey/XTreme. They are connected to the Airtalk input in the rear of the EFIS display. If both sensors are used, you simply tie the signal lines from each sender together and connect to EFIS. Made by MGL Avionics, these are some of the smallest aviation AHRS sensors available today.

The SP-6 is a magnetic compass sensor (magnetometer) for use with all MGL Avionics products that show heading. It contains a three axis magnetic field sensor and a 3 axis accelerometer. The system used a Cortex M3 32 bit processor. If a SP-7 AHRS is used on the same communications link, tilt compensation can be performed using gyro based attitude data.

What information can be displayed on the EFIS: Magnetic Heading, Wind speed and direction vector

Technical
Size: Approx 3.5” x 3.5”
Weight: 175g with connector (6 oz)
Power consumption: 50mA / 120mA (heater on)