JP Hobby Electrical Magnetic Brake Controller System ALF

Download the Brake Controller Setup Manual Here

Electrical Magnetic Brake Controller for RJP Hobby magnetic brake systems with braking force controlled independently Left / Right. This is the same controller that is included with JP Hobby Electric Wheel and Brake Sets.

Signal Input: Connect the module on your receiver on a 2 or 3 position switch channel or for variable braking force, to a slider or rotary (variable) knob on your TX. Some will set up brakes as a mix, with the "down elevator" to save a channel. The braking force is controlled independently Left / Right by the servo travel/endpoints you set in your TX.

• Input： 7.4v~25.2v (2~6S lipo)
• Output Voltage: 6~10V
• Size: 75 x 33 x 10mm
• Weight: 32g

• Input： 7.4v~25.2v (2~6S lipo)
• Output Voltage: 6~10V
• Size: 75 x 33 x 10mm
• Weight: 32g