JetCat
JC 61167-0010

Smoke Pump PRO, for JetCat Turbine Engines

Smoke Pump PRO, for JetCat Turbine Engines

Currently Unavailable - No ETA
Call for Pricing
Item Qualifies for Free Ground Freight (48 States) on Orders Over $125

Smoke Pump PRO, for JetCat Turbine Engines

  • Fully opto-isolated inputs
  • Can be operated parallel to the turbine battery.
  • 3 different operating modes can be programmed:

1) Rx-Mode: Control via a free receiver channel (proportional power control or on/off control only)

2) ECU mode: In conjunction with the JetCat ECU, the pump is controlled via the "smoker valve" output of the ECU.

3) ECU/ Rx-Mode: control of the pump via a free receiver channel, in addition the smoker pump is connected to the JetCat ECU; this prevents accidental starting of the pump with the turbine stopped (i.e. the ECU only releases the pump if the turbine is actually running)

  • Freely programmable conveying capacity.
  • In addition, the pump has a control output for an optional electromagnetic shut-off valve. The valve opens automatically whenever the pump is running (Art. No.:61106-00).
  • Shapely, sturdy, anodized aluminum housing
  • Dimensions : D=31.5mm ; L=77mm; 110gr
  • Flow rate : max 1800ml/min (measured with smoke oil as medium and 7V battery voltage!)
  • Pressure : max. 5bar
  • Power supply : 6,8-9,6V, max 7A
  • Inputs : 1x control input from receiver 1x enable input to the ECU
  • Outputs : 1x control output for electromagnetic shut-off valve