Park 450 Outrunner Brushless Motor

E-flite Park 450 Outrunner Brushless Motor

• Extremely quiet and lightweight—just 2.5 ounces (72 g)
• High-torque alternative to inrunner brushless motors
• Includes mount, prop adapter and mounting hardware
• External radial rotor design—4mm shaft can easily be reversed for alternative motor installation
• Slotted 12-pole outrunner design
• Ideal for 3D park flyers (15–25 oz) and scale park flyers (20–30 oz) using 2–3S 1200–2100mAh Li-Po batteries
• Quiet, efficient operation

The Park 450 is ideal for 3D park flyers 15 to 25 ounces and scale park flyers 20 to 30 ounces, using 2S–3S 1200–2100mAh Li-Po battery packs. It will provide sport 3D performance for a Mini Edge-size plane and great performance on the new E-flite P-47.

Needed to Complete: 20A brushless ESC, 9x6–11x3.8 prop, 2S–3S 1200–2100mAh Li-Po Battery

Specifications

• Type: Brushless outrunner
• Size: Replacement for 370 or 400
• Bearings or Bushings: One 4 x 8 x 3mm Bearing, and One 4 x 9 x 4mm Bearing
• Recommended Prop Range: 9x6 to 11x3.8 Slow Flyer or 10x5 to 12x6 Electric
• Voltage: 7.2–12
• RPM/Volt (Kv): 890
• Resistance (Ri): .20 ohms
• Idle Current (Io): .70A @ 8V
• Shaft Diameter: .16 in (4mm)
• Overall Length: 1.30 in (33mm)
• Weight: 72 g (2.5 oz)
• Overall Diameter: 1.10 in (28mm)
• Diameter: 1.1 in (28mm)
• Length: 1.3 in (33mm)
• Continuous Current: 14A
• Maximum Burst Current: 18A for 15 seconds
• Cells: 2–3 Li-Po or 6–10 Ni-Cd/Ni-MH
• Speed Control: 20A brushless ESC