Aircraft Tool Supply
ATS 3882-5

Cylinder Base Wrench Set, from Aircraft Tool Supply, ats-3882-5

Cylinder Base Nut Wrench Set

Item Qualifies for Free Ground Freight (48 States) on Orders Over $350

Cylinder Base Nut Wrench Set

  • 4 Wrench Set in Hex Sizes: 1/2", 9/16", 5/8", and 3/4".
  • Fits all Continental, most Lycoming, and many other types of aircraft engines.
  • 15" (381mm) span fits around almost all aircraft cylinders.
  • 0.14"(3.5mm ) thin wall fits into tight areas.
  • 12-point end fits both hex 12-point nuts.
  • 1/2" square drive.
  • Forged from 4130 steel and tempered for maximum strength.
  • Industrial chrome plating improves surface hardness and resists corrosion.
  • Quality tested to meet or exceed engine manufacturers torque specs.
  • Replaces our 2882 series wrenches.
  • ATS Pro Lifetime warranty.

Most Continental engines will require either a 1/2" or a 9/16" wrench. The notable exceptions are the IO-520 and the O-470 engines which require a 5/8" (and sometimes a 9/16") wrench. The Lycoming Wide Decks also use these wrenches (most commonly the 3/4" wrench). Additionally, a few of the older Continental engines will require the 3/4" wrench.

The new ATS 3882-series Cylinder Base Nut Wrenches are made from forged alloy steel, tempered, and hardened for maximum strength. They also have an industrial chrome plating to improve surface wear, and protect against rust and corrosion. Their thin-wall construction guarantees they will fit nuts close to the cylinder casing without grinding down the wrench's outer diameter. And with a 15" span, they clear even the tallest cylinders. In fact, the new 3882 Cylinder Base Wrenches address just about every concern of the previous 2882 series, while including several enhancements to make your work easier. They also carry the ATS Pro lifetime warranty, so they may very well be the last cylinder wrenches you'll ever have to purchase.