The Mammoth 250 SE Turbine Engine, 56 lbs Thrust, by Jet Central

WATCH OUT FOR THIS MAMMOTH! THE BEAST HAS AWAKENED!

Click Here to Download the Instruction Manual
Jet Central Turbine Maintenance Cycle: 25 Hours; $250 Overhaul Fee + $60 Freight

NEW! Jet Central "SE" Smart Electronics ECU System

• Metallic robust HDT
• Safety acceleration flameout prevention
• Self-adjusting features
• Easy fine tuning, do more with less adjustment
• Simple, graphic navigation menus
• Keep track of your telemetry with an easy to use interface
• One-click altitude compensations
• All the information you need in an easy to read display

A powerful turbine producing 25.5 kg (56 lbs) of thrust ready to fly all the big Jets. The JET CENTRAL TURBINES ENGINES are in its own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

• Turbine Engine with integrated ECU
• Hard Case
• SE POWERPACK Unit
• Clear Fuel Line 4mm
• Clear Kerosene Start Line 3mm
• Clear Fuel Line 6mm
• 3 Cell LiFePo Battery
• Accessory Box
  • On/Off Manual Festo Valve (6mm.)
  • Hanger 9 Fuel Filter
  • S-Bus / Power Cable
  • USB Flash with Manuals
  • SE Hand Data Terminal (HDT)
  • JR Style Receiver throttle cable

• Thurst: 250 Newtons. 25.49 kg – 56. (lbs)
• Idle Thrust: 0.82 kg (1.8 lbs) @ 28,000 RPM
• RPM Range: 28,000 – 108,000 RPM
• Weight: 2.28 Kg (5.02 Lbs) with starter
• Diameter: 124.1 mm (4.89 in)
• Length: 325.40 mm (12.81 in)
• Exhaust Temperature: 500ºC – 700ºC
• Fuel Consumption: 0,81 Lt/min (28.51 oz/min) @ 104,000 RPM