Pilot RC 33" Foamy Electric Airplane ARF, Purple/Red/Yellow

Click Here for Foamy Instruction Manual

PNP Combo Includes: model plus motor, speed controller, prop and servos

Want an easy to build, fun to fly, practice model that you can fly anywhere, even from within a lockdown?! Pilot-RC has you covered!

Presenting the first Pilot 3D foamy, made from crash resistant printed EPP foam which provides great visibility and strength when joined with the included carbon fibre reinforcements.

Regardless of your aerobatic ability, the smooth and precise flying characteristics of this model make it suitable for anyone, but turn up the rates and you have an insanely capable 3D model where the pilot is the only limit!

• Carbon reinforced EPP foam, offering rigidity and crash resistance
• Designed for a combination of precision aerobatics and extreme 3D flying
• Can use standard Cyano (Superglue)
• All accessories included, just add your own electronics
• Complete air frame in pre-printed high visibility color scheme
• Carbon rods give the airframe structure and strength
• Includes pushrods, control horns, wheels and other small accessories

• Wingspan: 33" (840mm)
• Length: 35" (886mm)
• Wing area: 862"² (5,562 cm²)
• Weight: 3.6oz (104g); w/Electronics 7.4-9.8oz (210-280g)
• Motor: 2207-1680kv
• Servos: x3 8g servos (recommended 1.5kg torque)
• Batteries: 3S 450-550mAh
• Center of Gravity: 150mm, Measured back from leading edge of the wing at the fuselage
• Also requires receiver and all the usual building tools and supplies

Note: Due to constant design improvements Pilot RC reserves the right to change and modify design specifications without notice. Pilot's goal is to provide you with the highest performing airframes in the world using the latest technology, building techniques and materials.