Pilot RC
PRC F86F-P03-LG

2.2m F-86F Sabre Turbine Jet ARF, Landing Gear Combo, Skyblazers

2.2m F-86F Sabre Turbine Jet ARF, Landing Gear Combo, Skyblazers

Factory Order
$3,599.00
$275.00 Flat Rate Truck Freight to Commercial Addresses (48 States)
Add $100 for Residential Delivery - Inspection Required: Click Here

2.2m F-86F Sabre Turbine Jet ARF, Electric Retracts & Tailpipe, Skyblazers
Residential Addresses Require An Additional $100 Delivery Charge

Click Here for Delivery Inspection Requirements

Pilot is proud to present their first true scale plane. They wanted a model that was iconic and flies amazingly well. Enter the North American F-86F Sabre. With all the great flying characteristics of the classic F86 which we all know and love.

  • Full scale detail with rivets panel lines, simulated hatches, etc…
  • Full composite construction, lightweight and strong 
  • Two piece wing and two piece full flying stabiliser, all for easy transport
  • Quick release wings, no tools required
  • Quick release elevator system, clamp in place with a couple of turns to the bolt
  • Painted outside the mold so no seam lines
  • Fully hidden linkages for flap, rudder and ailerons; with no horn, servo arm, ball links or pushrods exposed

INCLUDED HARDWARE:

  • Complete air frame (including aluminium wing-tubes and fibreglass control horns)
  • Servo extension leads
  • Dual wall tail pipe (for 120-180N turbines)
  • Fiberglass fuel tanks (2100ml x2) and UAT (250ml)
  • Pre-prepared pushrods with ball links
  • Pre-glued control horns
  • Comes with air intake and turbine port covers

Version Options

Landing Gear Combo (Requires Servos & Turbine):

  • Pilot-RC F86F kit
  • Gear Door Installed
  • Electric Landing Gear & Brakes Set

Turbine Ready – Sport-Scale Version (Requires Turbine)

  • Pilot-RC F86F kit
  • Gear Door Installed
  • Electric Landing Gear & Brakes Set
  • (10) Pilot-RC Servos and 4 to 1 connectors for aileron/flap/brake/retract, all pre-installed

Turbine Ready – Pro Scale Version (Requires Turbine)

  • Pilot-RC F86F kit
  • Gear Door Installed
  • Electric Landing Gear & Brakes Set
  • (10) Pilot-RC Servos and 4 to 1 connectors for aileron/flap/brake/retract, all pre-installed
  • Wing Drop Tank
  • Smoke System (includes kevlar tank, smoke pump, injection pipe and fuel tubing)
  • Speed Brake (requires two additional servos)
  • Scale Cockpit (minus pilot)
  • Wingbags
  • Wingspan: 77.9" (1,980mm)
  • Wing area: 1,310 in/sq (8,450cm/sq)
  • Weight: 27.9lbs (12.7kg) without speed brake, drop tank or cockpit
  • Turbine: 120-180N
  • Servos: Requires 11, +2 optional
    • x5 super high torque (minimum 40kg) // Uses x1 per elevator, x1 per flap, x1 on rudder
    • x2 super high torque (minimum 20kg) // Uses x1 per aileron
    • x4 middle size servo, 35 x 15 x 30mm // Uses x3 for gear doors and x1 for steering
    • +2 super high torque (minimum 40kg) if installing Speed Brake

BASIC SETUP:
Control throws:

  • Aileron: 17mm – Rudder: 35mm
  • Elevator: 37mm up / 25mm down
  • Measured from the front of the leading edge on the root of the elevator.
  • Elevator center position is 12mm down from the top of the fuselage
  • Take-off Flap: 30mm
  • Landing Flap: 55mm
  • Speed brake 1: 100mm
  • Speed brake 2: 190mm
  • Measured from the back of the speed brake plate.
  • The CG is 305mm from the front leading edge on the root of the wing