2.2m F-86F Sabre Turbine Jet ARF, Turbine Ready Pro, Desert Rats
Residential Addresses Require An Additional $100 Delivery Charge

Includes: Electric Retracts with Brake Set, Tailpipe, Servos, Drop Tanks, Smoke System, Speed Brake and Cockpit (All Installed at Factory)

Click Here for Delivery Inspection Requirements

Pilot is proud to present their first true scale plane. They wanted a model that was iconic and flies amazingly well. Enter the North American F-86F Sabre. With all the great flying characteristics of the classic F86 which we all know and love.

• Full scale detail with rivets panel lines, simulated hatches, etc…
• Full composite construction, lightweight and strong 
• Two piece wing and two piece full flying stabiliser, all for easy transport
• Quick release wings, no tools required
• Quick release elevator system, clamp in place with a couple of turns to the bolt
• Painted outside the mold so no seam lines
• Fully hidden linkages for flap, rudder and ailerons; with no horn, servo arm, ball links or pushrods exposed

INCLUDED HARDWARE:

• Complete air frame (including aluminium wing-tubes and fibreglass control horns)
• Servo extension leads
• Dual wall tail pipe (for 120-180N turbines)
• Fiberglass fuel tanks (2100ml x2) and UAT (250ml)
• Pre-prepared pushrods with ball links
• Pre-glued control horns
• Comes with air intake and turbine port covers

Version Options

Landing Gear Combo (Requires Servos & Turbine):

• Pilot-RC F86F kit
• Gear Door Installed
• Electric Landing Gear & Brakes Set

Turbine Ready – Sport-Scale Version (Requires Turbine)

• Pilot-RC F86F kit
• Gear Door Installed
• Electric Landing Gear & Brakes Set
• (10) Pilot-RC Servos and 4 to 1 connectors for aileron/flap/brake/retract, all pre-installed

Turbine Ready – Pro Scale Version (Requires Turbine)

• Pilot-RC F86F kit
• Gear Door Installed
• Electric Landing Gear & Brakes Set
• (10) Pilot-RC Servos and 4 to 1 connectors for aileron/flap/brake/retract, all pre-installed
• Wing Drop Tank
• Smoke System (includes kevlar tank, smoke pump, injection pipe and fuel tubing)
• Speed Brake (requires two additional servos)
• Scale Cockpit (minus pilot)
• Wingbags

• Wingspan: 77.9" (1,980mm)
• Wing area: 1,310 in/sq (8,450cm/sq)
• Weight: 27.9lbs (12.7kg) without speed brake, drop tank or cockpit
• Turbine: 120-180N
• Servos: Requires 11, +2 optional
• • x5 super high torque (minimum 40kg) // Uses x1 per elevator, x1 per flap, x1 on rudder
  • x2 super high torque (minimum 20kg) // Uses x1 per aileron
  • x4 middle size servo, 35 x 15 x 30mm // Uses x3 for gear doors and x1 for steering
  • +2 super high torque (minimum 40kg) if installing Speed Brake

BASIC SETUP:
Control throws:

• Aileron: 17mm – Rudder: 35mm
• Elevator: 37mm up / 25mm down
• Measured from the front of the leading edge on the root of the elevator.
• Elevator center position is 12mm down from the top of the fuselage
• Take-off Flap: 30mm
• Landing Flap: 55mm
• Speed brake 1: 100mm
• Speed brake 2: 190mm
• Measured from the back of the speed brake plate.
• The CG is 305mm from the front leading edge on the root of the wing