Highest Quality Products Coast to Coast

 
1/5th F-16 Falcon 3m Turbine Jet ARF, Black/Gray

1/5th F-16 Falcon 3m Turbine Jet ARF, Black/Gray

* Required Fields

Factory Order

Item:   PRC F16-3-01
Price: $4,999.00 
$375.00 Flat Rate Shipping
Add to Cart

1/5th F-16 Falcon 3m Turbine Jet ARF, Black/Gray, by Pilot RC
Residential Addresses Require An Additional $100 Delivery Charge

Click Here for Delivery Inspection Requirements
Have your own freight connections? Contact us directly at (877) 219-4489.

Pilot-RC is very pleased to announce the production of what is one of aviations most epic aircraft ever, the General Dynamics F16 Fighting Falcon.

  • Full composite construction, lightweight and strong
  • Two piece wing and two piece full flying stabiliser, both fully removeable
  • Easily detachable rudder for easy transport
  • Two piece fuselage, with the split strategically placed to allow daily removal of tail section for easy transport to and from the flying field
  • Easily detachable ventral fins, held in place with just two screws
  • Painted outside the mold so no seam lines

Pilot wanted this one to go above and beyond as a beautiful scale model. They found ways to make it reliable and tough enough to actually be flown on a regular basis, and not a problem to transport or put together, all in a package that fly’s brilliantly well.

SPLIT FUSELAGE FOR EASY TRANSPORT
The entire fuselage can be split, strategically placed between turbine and thrust tube, allowing for the entire fuselage to come apart with just five screws and two connectors for easy transport to and from the field.

Front nose cone can also be removed by unscrewing the pitot tube

INCLUDED HARDWARE:

  • Complete airframe (including fiberglass control horns)
  • Carbon fiber wing-tubes, integrated into each wing
  • Servo extension leads
  • Fixed Dual wall thrust pipe (for 200-320N turbines)
  • Fuel tank (6600ml) and UAT (250ml)
  • Pre-prepared pushrods with ball links
  • Pre-glued control horns
  • Wingspan: 83.3" (2.115mm)
  • Length: 120.5" (3,060mm)
  • Weight: 46.8lbs (22.1kg) with Vector Thrust pipe
  • Turbine: 200-320N
  • Servos: (x9 + 2 optional)
    x5 super high torque (minimum 35kg) / Uses x1 per aileron, x1 per elevator, x1 on rudder
    x4 middle size servo, 35 x 15 x 30mm (minimum 16kg) / Uses x3 for gear doors and x1 for steering
    +2 super high torque (minimum 35kg) if installing vector thrust pipe

BASIC SETUP:

  • Control throws:
    • Aileron: 45mm up / 45mm down – 40% Expo
    • Rudder: 50mm left / 50mm right – 50% Expo
    • Elevator: 35mm up / 35mm down – 45% Expo, Measured from the front of the leading edge of the elevator
    • Vector thrust if installed: Maximum deflection – 50% Expo
  • The CG is 240mm from the front leading edge on the root of the wing
Chief Aircraft Logo

The best service and prices, with the largest inventory & fastest shipping. Serving aircaft owners, pilots & RC modellers for 30 years.

Grants Pass Airport
1301 Brookside Blvd. - Grants Pass, OR 97526
West Coast Store: Mon-Fri 7:00am-4:00pm Pacific Standard Time

Deland Airport
813A Flightline Blvd. Ste. 1 - Deland, FL 32724
East Coast Store: Mon-Fri 9:00am-5:00pm, Eastern Standard Time

Secure Card Transactions

USA ePay

Chief's Secure Ordering

Online Orders:Our Site is Secure!
Aircraft / Avionics Orders:(800) 447-3408
Radio Control Orders:(877) 219-4489
24 Hour Fax:(541) 479-4431
Master Card Logo Visa Logo American Express Logo Discover Logo

Chief's Customer Service

Customer Service: (800) 447-3408

Customer Service Request Form

Customer Service Info

Business Hours

E-mail & Phone Numbers