Replacement Electric Retract Landing Gear Controller V2

Replacement Electric Retract Landing Gear Controller V2, from Pilot RC

Download the Instruction Manual Here

Designed to operate as easily as possible the electric retract systems in your model aircraft. This particular unit is able to control the retracts, brakes and up to three gear doors.

• Patch leads included with controller
• Operating voltage: 7.4v – 8.4v (Direct from 2s Lipo battery)
• Low voltage cut off: Auto gear down if battery drops below 7.4v
• Controls gear, brakes and up to three gear doors
• Fine tuning available for the electric brakes to assure a straight line upon braking
• Four options for gear door sequencing
• Optional ABS braking
• Safety feature: “Gear Up” incorporates a 4 second delay before gear is actually retracted. During this time an audible buzzer is activated warning the user of the imminent retraction of the gear, allowing time to reverse the process if due to an accidental “Gear Up” while still on the ground.
• WARNING: Do not exceed the maximum voltage of 8.4v or equivalent 2s Lipo