Pilot RC
PRC E330NG 40-P02

150cc Extra 330NG Blue/Red ARF, from Pilot RC, prc-ext330ng-40-p02

40% 115" Extra 330NG Green/Carbon ARF

Due October
$1,999.00
+ $1,159.99
+ $1,829.99
$449.00 Flat Rate Shipping

Pilot RC 40% 115" Extra 330NG 150-170cc Green/Carbon Carbon Fiber ARF Gas Airplane
Residential Addresses Require An Additional $100 Delivery Charge

Click Here for Delivery Inspection Requirements

A brand new design, built from a classic. In 2019 Extra Acrobatic Aircraft unveiled their latest masterpiece, and now in 2020 Pilot-RC is unveiling theirs. The Extra NG is the latest iteration of the Extra family, each version becoming more precise and more agile than ever before, and this feeds down all the way through Pilot's models.

This new design, combined with all of Pilot-RC’s latest build innovations and methods provide a high quality kit that can be built within minutes upon arrival at the flying field and relied upon for strength, agility and all round fun.

  • Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
  • Patented quick assembly system for wings, stabilizer and SFG
  • Patented quick assembly system for canopy.
  • Film covering applied over a Genuine German Oracover (Ultracote) base
  • Highly prefabricated, experienced builders can have air ready in under a day
  • Pre-installed hinges (glued and pinned)
  • Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
  • Removable wings and stabs
  • Laser engraved motor mounting position
  • Easy canister installation due to open construction
  • Pull push system for Rudder servo

Included hardware:

  • Complete air frame with all basic accessories
  • "Spare" lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time
  • Carbon fiber main undercarriage
  • Tail-gear assembly and wing-tubes
  • Fiberglass control horns and wheel pants
  • Pre-installed hinges and pre-mounted canopy
  • Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
  • Wheels, axels and wheel pants
  • Pre-prepared pushrods with ball links
  • Matching carbon spinner

Laser Ultracote Replacement Colors

Scheme -01 Scheme -02 Scheme -03
White - HAN U870 White - HAN U870 Pearl Purple - HAN U847
True Red - HAN U866 Apple Green - HAN U903 Orange - HAN U877
Black - HAN U874 Carbon Fiber - HAN U910 White - HAN U870
Metallic Blue    
  • Wingspan: 115" (2.920mm)
  • Length: 107.5' (2.730mm)
  • Wing area: 2,182 in sq (14,082cm sq)
  • Weight: 38.2lbs (17.4kg)
  • Motor: 150-180cc or equivalent electric
  • Servos: 8 high torque plus throttle // Uses x2 per aileron, x1 per elevator half and x1 or x2 on rudder using push-pull
  • Center of Gravity: 215mm
    Measured back from leading edge of the wing at the fuselage.
    This coincides exactly with the center of the wing tube.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Note: Due to constant design improvements Pilot RC reserves the right to change and modify design specifications without notice. Pilot's goal is to provide you with the highest performing airframes in the world using the latest technology, building techniques and materials.