Krill Models
KRM E330LX 37-GBM-RB

170cc Extra 330LX ARF, with Split Cowl, GBM Scheme, Includes Spinner & Fuel Tray, from Krill Models, krm-e330lx-37-gbm-rb

37% Extra 330LX ARF, GBM Scheme, Includes Spinner & Fuel Tray

$3,595.00
+ $1,159.99
+ $1,829.99
$329.00 Flat Rate Shipping

37% Extra 330LX ARF, with Spinner & Fuel Tray, GBM Scheme, by Krill Models

Residential Addresses Require An Additional $100 Charge - Delivery Inspection Requirements

The 37% Extra 330LX was designed by KRILL MODEL and Gernot Bruckmann . The design is similar to the "SC" version and the new Extra 330LX is near perfect scale model of the popular Extra 330LX by Mr. Walter Extra.

Krill had one major idea while developing the Extra 330LX with Gernot, weight! Krill wanted to develop an extremely light and special airplane designed for precision flying (IMAC, F3M) with a cost effective set up. The Extra 330LX has been designed to use fewer servos and smaller engines can be used. 150cc and upwards depending on your own requirements. This is a pure precision designed machine and not designed for 3D!

  • The wings, rudder, and elevators have central hinged control surfaces.
  • Each Aileron uses two servos
  • Each elevator uses one servo per side
  • The rudder only requires the use of two servos
  • One servo required on the throttle with 9 servos in total being required
  • The underside of the motor dome has been specially designed to aid in efficient engine cooling
  • The landing gear covers (skirts) are integrated into fuselage finishing off the fuse with some scale detail
  • Included are carbon fiber main wing tube and stab tubes
  • The blue tinted canopy glass is pre-bonded into the canopy frame
  • The cowling and UC gear is installed
  • The firewall is set up for 150-170 cc engines
  • For an extra charge we offer a set up for 4-cylinder engines, this includes pre-installed reinforcement in the tail for the servos, modified firewall for the longer engine and the rudder control horn inside the fuse is not installed on the integrated Rc tray
  • Included in the kit is a tail wheel assembly and two main wheels (120mm)
  • Split cowl also available
  • Integrated Rc tray included with pre-installed Alu Rudder horn, with the option of the use of a direct rudder servo setup depending on the type of engine installed
  • The Carbon Fiber landing gear and wheel pants are designed for very easy assembly

Extra 330LX Kit contents

  • Airframe
  • Installed canopy bonded in to the canopy frame
  • Landing gear
  • Wheel pants
  • Carbon wing and stab tubes

Hardware included:

  • 2x 120mm wheels
  • 1x tailwheel Extra 41%
  • wings screws
  • Rudder tray horn 117mm installed
  • CNC control horns
  • Wingspan: 117.3 in (3m)
  • Length: 107.5 in (2.73m)
  • Engine: 150-200 cc
  • Weight: 37.5 lbs (17kg)
  • Wing Area: 150 dm2