Thunder 3D ARF

The Thunder 3D has been in the works for quite some time and Krill wanted to make sure that they brought something new and special for the new FAI category & F6A Artistic aerobatics. Thunder 3D is highly specialized and purposely build model for 3D flying. As you can see on the pictures, Krill has implemented many new ideas, including a new wing platform and airfoil.

Part No.	PHOTO	Description	CART	Price
KRM THDR3D-DO	PHOTO	Gas Airplane Thunder 3D ARF, Dance Orange Scheme, Krill Models In Stock!	ADD	$1150.00
KRM THDR3D-DR	PHOTO	Gas Airplane Thunder 3D ARF, Dance Red Scheme, Krill Models In Stock!	ADD	$1150.00

Thunder 3D is NOT meant for beginners and/or learning 3D flying!! You should have at least some knowledge of 3D flying to fly this airplane. On the other hand it will surprise you by it's maneuverability and endless possibilities in 3D flying.

 All composite kit includes: fuselage, cowl, rudder, elevators, wings, canopy, landing gear, wheel pants, CNC engine mount, screws and bolts, CNC f/g control horns, c/f wing tube, instructions.

Recommended servos:

• Wings - 1 per aileron, digital, fast and at least 7kg ( 100 oz.in)
• Elevators - only 1 servo is needed. At least 7kg ( 100 oz.in), with metal gears. Attention: pull pull system is used for elev.control.
• Rudder - 1 servo, digital and fast. At least 10kg ( 200 oz.in).

Specifications:
Wingspan: 75.6" (1.92m) Length: 70.8" (1.9m) Flying Weight: 36 lbs Propeller: APC 19x10 , 20x8 , 21x10	Engine: 20-30cc, Perfect for DLE-30 or MLD-28 Required: 6 channel radio & 4-5 servos Electric HACKER A60-22S , Master SPIN 99 , Lipo 10s, 3700mAh, APC 20x10E AXI 5325/16 , JETI SPIN 99 , Lipo 6s, 4400mAh, Mejzlík 22x10E