Hangar 9 1/4 Scale J-3 Cub ARF/PNP

Hangar 9's giant 1/4 Scale Piper J-3 Cub ARF is an incredibly accurate replica designed with the scale admirer in mind.

• Full-bodied, poseable pilot figure included
• Scale dash including Cub in tachometer
• Scale Cub wheels and functioning landing gear
• Operating door panels and removable interior seating for easy access to the plane's interior
• Collapsible wing struts connected to wing and fuselage with an intelligent pin and cotter key system
• Tubular construction for top outline more true to Cub scale lines
• Scale fin to fuselage fillet
• Covered in genuine Hangar 9 UltraCote®

Hangar 9 25% Fiberglass Floats

• Strong, durable, fiberglass construction
• Ultimate scale detail including rivets, chines & scale gear struts
• Internal water rudder servo for easy installation
• Front hatch for lead facilitates easy balancing of floats on a variety of model types
• Designed for easy installation, accurate alignment and performance
• Dual water rudder option for improved water steering
• Spring loaded dual water rudders

Part No.	PHOTO	Description	CART	Price
HAN 4550		Gas Airplane 1/4 Scale J-3 Cub ARF, Hangar 9 In Stock!	ADD	$529.99*
Prices With * Include Ground Freight (48 States) - Plus $22 Oversize Charge

Part No.	PHOTO	Description	CART	Price
HAN 4575		Gas Airplane 1/4 Scale J-3 Cub PNP, with (6) High Torque Servos and Zen G20EI, Hangar 9 In Stock!	ADD	$1199.99*
Prices With * Include Ground Freight (48 States) - $100.00 Oversize Charge

Part No.	PHOTO	Description	CART	Price
HAN 4580	PHOTO	Fiberglass Floats, for 1/4 Scale J3 Cubs, Hangar 9 In Stock!	ADD	$249.99*
Prices With * Include Ground Freight (48 States) - Plus $13.50 Oversize Charge

Part No.	PHOTO	Description	CART	Price
HAN 4550 COMBO1		Gas Airplane 1/4 Scale J-3 Cub ARF, Saito 180 Engine, (5) JR PS821 Servos, (1) Hitec HS-425BB Servos, (1) Xoar 18x6 prop, Hangar 9 In Stock!	ADD	$1079.00*
HAN 4550 COMBO2		Gas Airplane 1/4 Scale J-3 Cub ARF, (1) E-Flite M4110A, (2) 4S Lipo Battery, (4) Stand-offs, (1) Castle PHX 85HV, (5) JR PS821 Servos, (1) Xoar 18x10, Hangar 9 In Stock!	ADD	$1309.00*
Prices With * Include Ground Freight (48 States).

Part No.	PHOTO	Description	CART	Price
HAN 311	PHOTO	Wheel, 25% J3 Cub 4.25" Pair, Hangar 9 In Stock!	ADD	$19.95

Large scale air enthusiast will marvel at the Hangar 9 giant scale, super detailed J-3 Cub. The Cub is perfect for the 1st time large scale flight experience because of its smooth flight characteristics.

Hangar 9 has thought of just about everything to make this 1/4 scale Cub an incredibly accurate replica of the ever-popular Piper J-3 Cub. Right down to the scale dash with Piper Cub emblem in the tachometer, this is the large scale beauty designed with the scale admirer in mind. Scale enthusiasts will appreciate the more realistic Cub outline facilitated by simulated scale tubular construction of the tup fuselage contour. Likewise, the scale fin to fuselage fillet molding echoes its full-scale counterpart. The scale Cub wheels and working landing gear facilitate easier landings, tough and go excitement and one-wheel arrivals.

Scale fanatics will be astonished by the full-bodied pilot figure that is not only of accurate scale but is also poseable. The operating door panels offer easy access to the interior of the plane and interior seating locks to the cockpit floor yet is also removable; both also contribute to the scale realism of the full scale Cub.

Besides the unparalleled scale detail, you also get smart design features like collapsible wing struts that are connected to the wing with a pivoting pin and keeper while a pin and cotter key system allows the struts to be removed from the fuselage without hassle. The 2-piece stab can also be removed if necessary.

The J-3 Cub can also be transformed by luxury of gas-and-go by adding a Zenoah G20ei engine.

Needed to Complete:

Recommended Setup - Gas

• Zenoah G20ei 20cc Electronic Ignition Engine
• 4 or more channel radio system
• 6 JR SPORT Digital Hi-torque DS821 Servos
• 7-channel ScanSelect PCM Receiver
• JR 6V 2400mAh Ni-Cd or JR 6V 2300mAH Rx Battery Pack
• 15x8-16x6 Propeller
• 8mm x 1.25 Dubro Spinner Prop Nut

Recommended Setup - Glow

• Evolution 1.00NX 2-stroke Evolution Engine with Muffler,
• Saito FA-125 4-Stroke AAC with Muffler
• 4 or more channel radio system
• 6 JR SPORT Digital Hi-Torque DS821 Servos
• 7-channel ScanSelect PCM Receiver
• JR 6V 2400mAh Ni-Cd or JR 6V 2300mAh Rx Battery Pack
• 14x6-16x4 (for Evolution) or 16x6-18x6 Propeller (for Saito)
• 8mm x 1.25 Dubro Spinner Prop Nut

Recommended Setup - Electric

• E-flite Power 110BL Outrunner, 295Kv
• Castle Creations 85A High Voltage ESC
• 4 or more channel radio system
• 5 JR SPORT Digital Hi-torque DS821 Servos
• 7-channel ScanSelect PCM Receiver
• JR 6V 2400mAh Ni-Cd or JR 6V 2300mAh Rx Battery Pack
• 2 Thunder Power 4S 5000mAh Li-Po Battery Packs
• 19x8E APC Propeller

Specifications:
Wingspan: 106" (207 cm) Overall Length: 68 in (172.7 cm) Wing Area: 1630 sq in (150.2 sq dm) Wing Loading 21.73 oz/sq ft Weight: 14.5-16.5 lb (6.6-7.5 kg) Servos: 6 JR Hi-torque digital servos Radio: 4 to 6 channels	Prop Size: 15x8-16x6 for gas; 14x6-16x4 for 2-stroke; 16x6-18x6 for 4-stroke; 19x8E for electric Recommended Engine: 1.00-1.60 2-stroke; 1.20-1.80 4-stroke; 20-26cc gas Motor Size: E-flite Power 110 Brushless Outrunner PNP Inclundes: Zenoah G20ei 20cc electronic ignition gas engine, 6 JR Hi-torque digital servos

Hangar 9 25% Fiberglass Floats

Part No.	PHOTO	Description	CART	Price
HAN 4580	PHOTO	Fiberglass Floats, for 1/4 Scale J3 Cubs, Hangar 9 In Stock!	ADD	$249.99*
Prices With * Include Ground Freight (48 States) - Plus $13.50 Oversize Charge

These scale fiberglass floats are specifically designed for the Hangar 9 ¼-Scale Piper J-3 Cub, so you can go from pavement to pond in just minutes. Whether flying glow or electric, you can enjoy the afternoon at the lake with this fantastic accessory for your scale plane. The ARF floats are constructed of fiberglass and feature scale rivets and chines as well as scale gear struts for an enhanced overall scale look. Other smart design features include a dual water rudder option for improved water steering and a spring-loaded rudder design that will allow you to maintain steering even if they strike an object in the water. And, the internal water rudder servo facilitates easy installation. The ¼-scale fiberglass floats are adaptable to a variety of ¼-scale planes thanks to the front hatch that allows you to add lead for balancing the floats on a variety of models.

Needed to Complete

NEEDED TO COMPLETE OPTIONAL WATER RUDDER

Standard Servo (qty.2)

Non mixing radio set up:

"Y" harness (qty 2)

24 in. extension (qty.2)

Mixing radio set up:

12 in. extension (qty.2)

24 in. extension (qty.2)