Phoenix-10

Features of the Phoenix-10:

• Extremely Low Resistance (.013 ohms)
• High rate (11 KHz) switching (PWM)
• Up to 10 amps continuous current with proper air flow, 15 amps surge
• Five to eight cells with four micro servos
• Up to ten cells with three micro servos
• Sixteen cells MAX (with BEC disabled)
• Dynamic braking ensures folding props fold promptly
• BEC (1.5A) provides power to receiver and servos - eliminates separate receiver battery
• User Programmable Features:

• Low-voltage cutoff
• Over-current Protection
• Brake Type
• Throttle Range - fixed/self-adjusting/governor
• Timing Advance
• Cutoff Type
• Soft Start ramp up

• Runs motor in forward OR reverse
• Auto Motor Cutoff with Reset
• Safe "power on" arming program ensures motor will not accidentally turn on
• Low torque "soft start" prevents damage o fragile gear boxes
• Auto shut down when signal is lost or radio interference becomes severe

Phoenix-25

Features of the Phoenix-25™:

• Extremely Low Resistance (.013 ohms)
• High rate (11 KHz) switching (PWM)
• Up to 25 Amps continuous current with proper air flow, 35 amps surge
• Five to eight cells with four micro servos
• Up to ten cells with three micro servos
• Up to ten cells with three micro servos
• Sixteen cells MAX (with BEC disabled)
• Dynamic braking ensures folding props fold promptly
• BEC (1.5A) provides power to receiver and servos - eliminates separate receiver battery
• User Programmable Features:
  • Low-voltage cutoffs Including Auto-Lip detect
  • Over-current Protection
  • Brake Type
  • Throttle Range - fixed/self-adjusting/governor
  • Timing Advance
  • Cutoff Type
  • Soft Start ramp up
• Runs motor in forward OR reverse
• Auto Motor Cutoff with Reset
• Safe "power on" arming program ensures motor will not accidentally turn on
• Low torque "soft start" prevents damage to fragile gearboxes
• Auto shut down when signal is lost or radio interference becomes severe

Top of page

Phoenix-35

Features of the Phoenix-35™:

• Extremely Low Resistance (.0035 ohm)
• High rate adjustable switching (PWM)
• Up to 35 Amps continuous current with proper air flow, 45 amps surge
• Five to ten cells with four micro servos
• Sixteen cells MAX (with BEC disabled)
• Dynamic braking ensures folding props fold promptly
• BEC (3A) provides power to receiver and servos - eliminates separate receiver battery
• User Programmable Features:
  • Low-voltage cutoff with Auto-Lipo as default
  • Over-current Protection
  • Brake Type
  • Throttle Range - fixed/self-adjusting/governor
  • Timing Advance
  • Cutoff Type
  • Soft Start ramp up
  • Switching Frequency
• Runs motor in forward OR reverse
• Auto Motor Cutoff with Reset
• Safe "power on" arming program ensures motor will not accidentally turn on
• Low torque "soft start" prevents damage to fragile gearboxes
• Auto shut down when signal is lost or radio interference becomes severe

Top of page

Phoenix-45

Features of the Phoenix-45:

• Extremely Low Resistance (.0026 ohms)
• High rate adjustable switching (PWM)
• Up to 45 amps continuous current with proper air flow, 60 amps surge
• Five to ten cells with four micro servos
• Up to twelve cells with three micro servos
• Sixteen cell MAX (with BEC disabled)
• Dynamic braking ensures folding props fold promptly
• BEC (3A) provides power to receiver and servos - eliminates separate receiver battery
• User Programmable Features:

• Low-voltage cutoff
• Over-current Protection
• Brake Type
• Throttle Range - fixed/self-adjusting/governor
• Timing Advance
• Cutoff Type
• Soft Start ramp up
• Switching Frequency

• Runs motor in forward OR reverse
• Auto Motor Cutoff with Reset
• Safe "power on" arming program ensures motor will not accidentally turn on
• Low torque "soft start" prevents damage to fragile gearboxes
• Auto shut down when signal is lost or radio interference becomes severe

Top of page

Phoenix-60

• Extremely Low Resistance (.0013 ohms)
• High rate adjustable switching (PWM)
• Up to 60 amps continuous current with proper air flow, 80 amps surge
• Five to ten cells with four micro servos
• Up to twelve cells with three micro servos
• Twenty cells MAX (with BEC disabled)
• Dynamic braking ensures folding props fold promptly
• BEC (3A) provides power to receiver and servos - eliminates separate receiver battery
• User Programmable Features:

• Low-voltage cutoff
• Over-current Protection
• Brake Type
• Throttle Range – fixed/self-adjusting/governor
• Timing Advance
• Cutoff Type
• Soft Start ramp up
• Switching Frequency

• Runs motor in forward or reverse
• Auto Motor Cutoff with Reset
• Safe "power on" arming program ensures motor will not accidentally turn on
• Low torque "soft start" prevents damage to fragile gearboxes
• Auto shut down when signal is lost or radio interferences becomes severe

Top of page

Phoenix-80

Features of the Phoenix-80™:

• Extremely Low Resistance (.001 ohm)
• High rate adjustable switching (PWM)
• Up to 80 Amps continuous current with proper air flow, 120 amps surge
• Five to ten cells with four micro servos
• Up to twelve cells with three micro servos
• Twenty cell MAX (with BEC disabled)
• Dynamic braking ensures folding props fold promptly
• BEC (3A) provides power to receiver and servos - eliminates separate receiver battery
• User Programmable Features:
  • Low-voltage cutoff including Auto-Lipo as default
  • Over-current Protection
  • Brake Type
  • Throttle Range - fixed/self-adjusting/governor
  • Timing Advance
  • Cutoff Type
  • Soft Start ramp up
  • Switching Frequency
• Runs motor in forward OR reverse
• Auto Motor Cutoff with Reset
• Safe "power on" arming program ensures motor will not accidentally turn on
• Low torque "soft start" prevents damage to fragile gearboxes
• Auto shut down when signal is lost or radio interference becomes severe

Top of page

Phoenix HV-85 High Voltage

Features of the Phoenix HV-85™:

• Extremely Low Resistance (.0015 ohms)
• High rate adjustable switching (PWM)
• Up to 85 Amps continuous current
• Dual Opto-Coupled (No BEC)
• Up to 36 cells or 12s Lipo MAX
• 16 cells or 3s Lipo MIN
• Dynamic braking ensures folding props fold promptly
• User Programmable Features:
  • Low-voltage cutoff with Auto-Lipo detect as default
  • Over-current Protection
  • Brake Type
  • Throttle Range - fixed/self-adjusting/ governor
  • Timing Advance
  • Cutoff Type
  • Soft Start ramp up
  • Switching Frequency
• Runs motor in forward OR reverse
• Overtemp Motor Cutoff with Reset
• Safe "power on" arming program ensures motor will not accidentally turn on
• Low torque "soft start" prevents damage to fragile gearboxes
• Auto shut down when signal is lost or radio interference

Top of page

Phoenix HV-110 High Voltage

In Stock

Features of the Phoenix HV-110™:

• Safe "Power On"
• Low torque "Soft Start" protects gear boxes and belt drives from shock
• Simple setup: no complicated switches or wiring
• Tough surface mount construction
• Smooth reverse exponential throttle
• Audible Arming Signal
• Self-calibrating endpoints: maximizes usable stick travel
• Auto Motor cut-off with reset
• Auto shut-down when signal is lost
• Microprocessor Controlled

Can you handle this much power? Has there ever been a controller this much ahead of it's time, and waiting for motor and battery technology to catch up to it? Make sure you're sitting down first before comparing the price to the nearest competing product with similar capabilities. And inexpensive in this case, most certainly does not mean anything was sacrificed in design and component quality. Castle Creations leads the industry in reliable design and also sets the standard for customer service and support. We know everything in your large aircraft rides on having smooth power you don't even have to think about, so when it comes time to step up in electric capability, rely on Castle Creations for quality first designed speed controllers, and the money you've saved makes you simply smarter.

Top of page

Phoenix-125 Brushless Motor Control

In Stock

• Battery Eliminator Circuit (BEC): eliminates receiver battery
• Safe "Power On"
• Microprocessor Controlled
• Tough surface mount construction
• Audible Arming Signal
• Auto Motor cut-off with reset
• Low torque "Soft Start": protects gear boxes and belt drives from shock
• Smooth reverse exponential throttle
• Self-calibrating endpoints: maximizes usable stick travel
• Auto shut-down when signal is lost
• Simple setup: no complicated switches or wiring

The Phoenix-125 is the paramount controller for either competition f5B and F5D flying, or just high energy hotliner sport flying. With an amazing 160A LMR surge rating, it can handle any LMR type application o the market. Space can be critical in tight performance fuselages, and the Phoenix-125's compact 1.25 x 2.65 x 1" dimensions leave you plenty of room for such an incredibly capable speed controller.

Top of page

PHX-Link™

• Adapter for PC interface with Phoenix model brushless controllers
• View, change and customize program options
• Update Phoenix ESC software via the internet
• Compatible with Windows 98SE, 98ME, 2000, and XP.
• USB port required

Top of page