E-flite 1-5 Cell DC Li-Po Battery Charger with Balancer

Part No.	PHOTO	Description	CART	Price
EFL C505	PHOTO	Battery Charger, 1-5 Cell with Balancer, E-Flite	ADD	$109.99

• Charges 1- to 5-cell LiPo or Li-ion batteries
• Large 2-line backlit LCD display for easy operation
• Intelligent balance charging for increased battery life and performance
• Polarity protection to prevent damage to the charger
• Adjustable charge rate while in charge process
• Safety timer to adjust maximum charge time available (0-720 min)
• Capacity cut off available (100-9900mAh)
• Temperature cut off available (20-80 degrees Celsius)
• Alarm warning and auto shut-off for: charge time over limit, charge capacity over limit, reverse voltage connection, input voltage error, connection breakdown, short circuit, and voltage differences during charge

Top of page

E-flite Celectra 1-3 Cell DC Li-Po Battery Charger

Part No.	PHOTO	Description	CART	Price
EFL C3005	PHOTO	Battery Charger, Celectra 1-3 Cell, E-Flite	ADD	$44.95

Part No.	PHOTO	Description	CART	Price
GP MM3105	PHOTO	2 Pin/Banana Plug Charge Adapter	ADD	$3.99
GP MM3148	PHOTO	2 Pin/Banana Plug Charge Lead, Deans	ADD	$6.99

The E-flite Celectra 1-3 cell Li-Po charger is a DC-powered charger meant only for 1-, 2-, or 3-cell (3.7-11.1V) lithium-polymer (Li-Po) battery packs and features a microchip CPU controller with a LED to display the charge status. It also precisely follows standard Li-Po charger algorithms. This programmed set of charging rules tells the charger to increase the voltage of the Li-Po cell to 4.2V (per cell). While the voltage is rising, the current is precisely kept at one of the preset rates (either 250mA, 500mA, 1A, 1.5A, or 2A). Once the maximum cell voltage is reached (at which point the battery is 80-90% charged), the charger steadily maintains a constant voltage ,while the current decreases until terminating the charge.

Features

• Selectable between 1-, 2-, or 3-cell Li-Po packs
• Automatically detects incorrect cell count selection
• 250mA, 500mA, 1A, 1.5A, and 2A selectable charge rates
• Reverse polarity protection on input and output
• Simple single push-button operation
• Red LED charge status indicator
• Audible beeper indicates power and charge status
• Input leads include banana plugs and alligator sleeves
• Banana output jacks w/ included JST (BEC) charge lead

Top of page

E-flite Celectra 1-2 Cell DC Li-Po Battery Charger

Part No.	PHOTO	Description	CART	Price
EFL C3000	PHOTO	Battery Charger, Celectra 1-2 Cell, E-Flite	ADD	$24.95

The E-Flite Celectra 1-2 cell Li-Po charger is a DC-powered charger meant only for 1- or 2-cell (3.7V-7.4V) lithium-polymer (Li-Po) battery packs and features a microchip CPU controller with a large LED to display the charge status. It also precisely follows standard Li-Po charger algorithms. This programmed set of charging rules tells the charger to increase the voltage of the Li-Po cell to 4.2V (per cell). While the voltage is rising, the current is precisely kept at one of the preset rates (either 500mA or 1A). Once the maximum cell voltage is reached (at which point the battery is 80-90% charged), the charger steadily maintains a constant voltage, while the current decreases until terminating the charge.

Features

• Automatically detects the number of cells (1 or 2) in the battery pack
• For Li-Po batteries over 500mAh only
• Selectable charge rates of 500mA and 1A
• High-efficiency direct current/rising voltage exchange mode minimizes heat output
• Bright red LED display indicates charge mode
• Reverse polarity protection
• Simple single push-button operation
• Charge beeper indicates charge is complete
• Banana plugs with alligator sleeves included
• JST (BEC connector on charger leads
• Mini-T adapter lead

Top of page

E-flite Celectra 4-Port 1-Cell 3.7V 0.3A DC Li-Po Charger

Part No.	PHOTO	Description	CART	Price
EFL C1004	PHOTO	Battery Charger, Celectra 4-Port 1-Cell 3.7V LiPo, 0.3A DC, E-Flite	ADD	$39.99
EFL C1005	PHOTO	Power Supply 6V, 1.5-Amp AC/DC, E-Flite	ADD	$14.99

• Four independently functioning charging circuits to reliably charge your single-cell Li-Po batteries
• AC/DC 6V power supply compatible
• All 4 ports can be used simultaneously or one at a time
• No need to use batteries while at home near a power source. Use our optional E-flite 6V power supply (EFLC1005)
• High capacity D-size batteries provide many charges and mazimum portability
• Charges E-flite® and ParkZone® single-cell Li-Po batteries.

The purpose-built charger for 1-cell batteries utilized by ParkZone’s Vapor™, Ember™, Ember 2 and Sukhoi, and E-flite’s Blade® mCX, there’s no better choice than the fast and efficient Celectra™ 4-port charger. With ultra-micro aircraft making waves as the hottest innovation in RC, it’s also a charger certain to be in high demand among customers. The Celectra operates off of D batteries, or at home with the convenience of E-flite’s 6V, 1.5A AC/DC Power Supply (sold separately).

Top of page