Flight Pack Field Box

• Plenty of room for all necessary flight gear
• Pre-cut wood parts for easy construction
• Large main compartment and built-in drawer
• Fuel-proof strap secures up to a gallon container of fuel
• Flip-top battery compartment accommodates most power panels

Angle Pro™

4-in-1 digital control throw & incidence meter

• Patented technology works on models of all types & sizes (U.S. patent 6880258)
• Easily measures control throws
• Incidence attachment allows precise digital measurement of wing, tail & thrust angles
• Clamps firmly and evenly to most control surfaces
• Reset "zero" at any angle – no need to level the airplane
• Hold function allows the last reading to be stored
• 18-inch bar included

• Measure exact control surface throws to 1/10 of a degree.
• Measures wing and tail incidence quickly and easily. You can "zero" the meter at any angle, so you don't have to level the airplane in order to measure.
• Attach the AnglePro™ to the prop hub to measure the thrust angle.
• You can even use the AnglePro™ as a precision level, accurate to within 1/10 of a degree.

TrainerLink

Learning to fly just got a whole lot easier. No longer will beginning pilots with JR radios have to sit on the sidelines because the instructor at the local flying field prefers a Futaba. The TrainerLink from Hangar 9 is an interface trainer cord that will allow modelers to link their JR radio with almost any Futaba radio for training purposes. It's state-of-the-art engineering designed to make it as convenient as possible for new pilots to have an enjoyable, stress-free introduction to the hobby.

• JR pilots can train or buddy-box with instructors who have Futaba radios
• Extra-long 7-foot cord
• Can also be used s a standard JR-to-JR trainer cord
• Works with nearly all Futaba radios (excludes 9C)

Micro Digital Tach

• LCD Tachometer
• Fits easily in pocket or flight box
• Safely and accurately read rpms on the LCD screen
• Selectable settings for 2-, 3-, & 4-bladed prop
• 0-32,000 rpm range
• 3V 220mAh lithium battery included
• Auto shut-off when not in use saves battery power
• 2 Year Factory Warranty

DVT: Digital Voltmeter/ Tachometer

• 2 products in 1
• Includes special "Y" harness for checking voltage of either transmitters or receivers
• Tachs 2, 3, or 4-blade props

Expanded Scale Voltmeter

• High precision voltage testing of transmitter and receiver battery packs
• Lets you chart your batteries' discharge characteristics
• Test batteries under simulated servo load for accurate readings
• Adaptable to most R/C systems

Digital Variable Load Voltmeter

• Monitors battery voltage before flight
• Three selectable loads: .5A, 1A or 2A
• Accurate digital LCD readout displays both current load and real-time voltage
• Works on 4- to 8-cell packs
• Universal lead

Digital Servo & Rx Current Meter

• Easily plugs in between the receiver and a servo, or between the battery and receiver, to aid in setting up linkages
• Accurately measures current, charge current, servo current draw, and discharge current
• Precise digital LCD readout displays current or voltage
• Allows you to locate binding and mismatched or defective servos
• Monitors charge voltage for peak charging and cut-off point for discharging
• Universal connector with 9" leads

Hangar 9's new Digital Servo and Receiver Current Meter lets modelers check current flow between multiple linkages. It will monitor overall voltage between the battery and receiver, charge current between the charger and charge jack, or current draw when used between the receiver and servo. Modelers can even monitor discharge current between the charge jack and battery cycler. All voltage information is displayed on the easy-to-read digital display and can be switched between volts or amps. The unit comes wired with universal connectors allowing to be used with all popular systems.

Flight Pack Field Box

• Premium quality precut wood parts for easy construction
• Large main compartment and built-in drawer
• Fuel-proof strap can secure up to a gallon container of fuel
• Optional plane cradles available

Deluxe Power Panel

• Solid state master design
• Use with any 12V battery
• Supplies power to starters, fuel pumps, and glow plugs
• Pump may be turned on and off with power switch

Heavy-Duty Super Starter

• Starts up to 1.8 cubic inch engines
• Extra-torque 12V DC motor
• For airplanes, helicopters, cars, or boats
• Aluminum drive cone with rubber insert
• Extra-long cord with battery clips

PowerPro Starter Source

• Cordless and portable
• Available w/130mA gel cell, 10-Cell Sub-C, or no battery
• Built-in charge jack
• 2-year warranty

The Starter Source is a convenient and portable power source for starting the Hangar 9 PowerPro 12V Starters. This is not a universal unit; it was specifically designed to fit the mounting holes on the Hangar 9 PowerPro Starters.

This version includes the 10-Cell, 12V Ni-CD.

Dimensions (WxLxH):3.375 x 5.8125 x 2 in

12V 7Ah Sealed Battery & 12V Battery Charger

Electric Fuel Pump

• Works from a 12V power source
• Alligator style battery clips
• Includes filtered fuel can clunk
• Built-in hooks allows for handy fuel can attachment

Ultra Fuel Pump

• Gas and Glow Compatible
• Composite material for years of touble-free service
• Includes fuel filter, fueling nozzle, fuel line, and mounting screws
• Overdrive gear sytem for smooth operation and fast fueling

Hangar 9's new Ultra Fuel Pump can be used with both gasoline and glow fuel and features overdrive gearing and transfers fuel quickly. The pump is ergonomically designed to be easy to hold on to while fueling and comes with a two year factory warranty, making it a fantastic value also. Hangar 9's Ultra Fuel Pump is a great addition to any field box.

Manual Fuel Pump

• Highly durable composite construction
• Includes fuel filter, fueling nozzle, fuel line, and mounting screws
• Overdrive gear system for fast fueling
• Built-in mounting tabs

Transmitter Stand

Available for both JR and Futaba transmitters, Hangar 9 Transmitter Stands fold neatly against the back of the transmitter when not in use. All mounting hardware included.

Glow Plug Locking Socket

• Attaches to most glow plugs
• Spring-loaded locking cli insures lock-on grip
• Color-coded alligator clips
• Power panel ready with banana plug on them

Start Stick

Engine Starting Aid

• Contoured non-slip wooden grip
• Molded rubber end protects from prop damage
• Fuel-proof construction