VIEW SHOPPING CART | TRACKING | CONTACT US | POLICY | MODEL CATALOG  

SWB CNC Machined Aluminum Motor Mounts

Part No.PHOTODescriptionCARTPrice
SWB MM-100-2-12
 PHOTO 
 Engine Mount, 100cc Aluminum 2-1/2 degree for DA or 3W 100cc Motor, SWB
 ADD 
 $55.00 

This specially designed aluminum mount for DA or 3W 100cc motors and weighs less than 2 oz. This will save you a lot of time and effort. Machined from 6061-T6 with a 3/8 rise at the highest point and 2 1/2º machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (5/16 typical left side of plane) line up the cross hairs on the mont. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)- 1/4", 4)- 1/16" boss extensions included.

Part No.PHOTODescriptionCARTPrice
SWB MM-150-2-12   Engine Mount, 120-150cc Aluminum 2-1/2 degree for DA or 3W 120-150cc motor, SWB
 ADD 
 $60.00 

This specially designed aluminum mount for DA or 3W 120cc-150cc motors and weighs less than 2 oz. This will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 2 1/2º machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (11/32 typical left side of plane) line up the cross hairs on the mont. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)- 1/4", 4)- 1/8" & 4)- 1/16" boss extensions included.

Part No.PHOTODescriptionCARTPrice
SWB MM-150-3   Engine Mount, 120-150cc Aluminum 3 degree for DA or 3W 120-150cc motors, SWB
 ADD 
 $60.00 

This specially designed aluminum mount for DA or 3W 120cc-150cc motors and weighs less than 2 oz. This will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 3º machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (7/16 typical left side of plane) line up the cross hairs on the mont. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)- 1/4", 4)- 1/8" & 4)- 1/16" boss extensions included.

Part No.PHOTODescriptionCARTPrice
SWB MM-150-3-12   Engine Mount, 120-150cc Aluminum 3 1/2 degree for DA or 3W 120-150cc motor, SWB
 ADD 
 $60.00 

This specially designed aluminum mount for DA or 3W 120cc-150cc motors and weighs less than 2 oz. This will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 3 1/2º machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (1/2 typical left side of plane) line up the cross hairs on the mont. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)- 1/4", 4)- 1/8" & 4)- 1/16" boss extensions included.

SWB Machined Aluminum Stand Offs

**For Use on  Aircraft that have the right thrust built in **
**ALL STAND OFFS HAVE A 1/4" THROUGH HOLE**

Part No.PHOTODescriptionCARTPrice
SWB 50STOF   Standoff Kit, Red, 1/2 inch-5/16 inch, SWB
 ADD 
 $22.00 
SWB 100STOF   Standoff Kit, Red, 1 inch-1-7/16 inch, SWB
 ADD 
 $24.00 
SWB 150STOF   Standoff Kit, Red, 1-1/2 inch to 1-15/16 inch, SWB
 ADD 
 $26.00 
SWB 200STOF   Standoff Kit, Red, 2 inch to 2-7/16 inch, SWB
 ADD 
 $28.00 

1/2"-15/16" Motor Stand Offs
Why goof around with using steel washers that are not all the same thickness. Here is a quick an simple way of spacing out your motor. The base stand off is precision machined from 6061-T6 aluminum. It measures 1" diameter at the base to give a good load bearing on the wood, and necks down to 5/8" in diameter at the motor and is a 1/2" long. If more length is required, simply add the spacers included to get the desired length up to 15/16" long. Kit comes complete with (4ea.of the following) 1/2" bases, 1/4", 1/8" & 1/16"

1"-1-7/16" Motor Stand Offs
Why goof around with using steel washers that are not all the same thickness. Here is a quick an simple way of spacing out your motor. The base stand off is precision machined from 6061-T6 aluminum. It measures 1" diameter at the base to give a good load bearing on the wood, and necks down to 5/8" in diameter at the motor and is a 1" long. If more length is required, simply add the spacers included to get the desired length up to 1-7/16" long. Kit comes complete with (4ea.of the following) 1" bases, 1/4", 1/8" & 1/16"

1-1/2" to 1-15/16" Motor Stand Offs
Why goof around with using steel washers that are not all the same thickness. Here is a quick an simple way of spacing out your motor. The base stand off is precision machined from 6061-T6 aluminum. It measures 1" diameter at the base to give a good load bearing on the wood, and necks down to 5/8" in diameter at the motor and is a 1-1/2" long. If more length is required, simply add the spacers included to get the desired length up to 1-15/16" long. Kit comes complete with (4ea.of the following) 1-1/2" bases, 1/4", 1/8" & 1/16"

2" to 2-7/16" Motor Stand Offs
Why goof around with using steel washers that are not all the same thickness. Here is a quick an simple way of spacing out your motor. The base stand off is precision machined from 6061-T6 aluminum. It measures 1" diameter at the base to give a good load bearing on the wood, and necks down to 5/8" in diameter at the motor and is a 2" long. If more length is required, simply add the spacers included to get the desired length up to 2-7/16" long. Kit comes complete with (4ea.of the following) 2" bases, 1/4", 1/8" & 1/16"