MKS DS92 Titanium Gear High Speed Micro Digital Helicopter Cyclic Servo
This is the MKS DS92 Titanium Gear High Speed Micro Digital Helicopter Cyclic Servo. This servo is recommended for 450 flybar helicopter cyclic applications, as well as small electric airplanes.- Dead band: 0.001ms (Default)
- Control System: +Pulse Width Control
- Working frequency: 1520μs / 333hz
- (RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8~6.0V DC
- Operating Temperature Range: -10 to + 60 Degree C
- Operating Speed (4.8V): 0.075 sec/60° degrees at no load
- Operating Speed (6V): 0.060 sec/60° degrees at no load
- Stall Torque (4.8V): 31.94 oz/in (2.30 kg-cm)
- Stall Torque (6V): 39.58 oz/in (2.85 kg-cm)
- 360° Modifiable: YES
- Motor Type: Coreless Motor
- Potentiometer Drive: Direct Drive
- Driver Type: FET
- Bearing Type: Dual Ball Bearings
- Gear Type: Chrome-Titanium alloy gear
- Programmable: NO
- Connector Wire Length: 20.0cm (7.86")
- Dimensions: 23x12x27.25mm (0.9x0.47x1.07")
- Weight: 17.43g (0.61 oz)
- Dead band: 0.001ms (Default)
- Control System: +Pulse Width Control
- Working frequency: 1520μs / 333hz
- (RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8~6.0V DC
- Operating Temperature Range: -10 to + 60 Degree C
- Operating Speed (4.8V): 0.075 sec/60° degrees at no load
- Operating Speed (6V): 0.060 sec/60° degrees at no load
- Stall Torque (4.8V): 31.94 oz/in (2.30 kg-cm)
- Stall Torque (6V): 39.58 oz/in (2.85 kg-cm)
- 360° Modifiable: YES
- Motor Type: Coreless Motor
- Potentiometer Drive: Direct Drive
- Driver Type: FET
- Bearing Type: Dual Ball Bearings
- Gear Type: Chrome-Titanium alloy gear
- Programmable: NO
- Connector Wire Length: 20.0cm (7.86")
- Dimensions: 23x12x27.25mm (0.9x0.47x1.07")
- Weight: 17.43g (0.61 oz)
Secure Card Transactions
|
|
Chief's Secure Ordering
| Online Orders: | Our Site is Secure! |
| Aircraft / Avionics Orders: | (800) 447-3408 |
| Radio Control Orders: | (877) 219-4489 |
| 24 Hour Fax: | (541) 479-4431 |
Chief's Customer Service
Customer Service: (800) 447-3408



