DLE Engines
DLE 222

DLE-222 4-Cylinder Engine

DLE-222 4-Cylinder Engine

Out of Stock
$1,899.99
Item Qualifies for Free Ground Freight (48 States) on Orders Over $150

DLE-222 4-Cylinder Engine

Click Here to Download the Warranty Return Form
Click Here to Download the Engine Manual

At 21.5 horsepower, the DLE-222 has more than enough power to push your plane through the air. And with an all-up weight of just over twelve pounds, it has the power-to-weight balance to make the most of it. Dual carbs help you fine tune it, sealed bearings keep it running smoothly and two mufflers keep it down to a dull roar. And for all you get – including mufflers, standoffs and a 6-bolt prop hub – the value-to-price ratio is impressive, too.

DLE-222 4 Cylinder Engine Version 3 Features:

  • New split crankcase for easier servicing
  • New Reed Block design
  • New Crankshaft design
  • Mufflers & gaskets
  • 2 x Ignition Modules (Latest Version able to handle up to 8.4v)
  • Twin carburetors
  • 2 Meters Fuel Line
  • Fuel Dot

Specifications:

  • Horsepower: 21.5-HP/7500rpm
  • RPM: 1000-7500 RPM
  • Idle speed: 1000 rpm
  • Recommended Props: 32x10, 32x12, 34x10
  • Displacement: 222.5cc
  • Bore and Stroke: 45mm×35mm
  • Compression Ratio: 7.6:1
  • Total Weight: 12.4 lbs (5610g)
  • Fuel: 30:1 mix ratio
  • Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
  • Replacement Sparkplug: NGK CM6 or equivalent
  • Requires: unleaded gasoline, 2-cycle oil, ignition batteries & propeller
  • Includes: Mufflers, Spark plugs, Gaskets, Bolts, Machined aluminum standoffs, Throttle arm extension

Dimensions

  • Total Width Including Both Cylinder Heads: 258mm not including spark plugs
  • Distance between Horizontal Mounting Hole Centers: 81mm
  • Distance between Vertical Mounting Hole Centers: 91mm
  • Height of Entire Mounting Plate: 107mm
  • Width of Entire Mounting Plate: 96mm
  • Length from Mounting Plate to Front Bearing: 228mm
  • Length from Mounting Plate to Prop Hub: 258mm
  • Height from Crankcase to top of Carburetors: 157mm
  • Distance between Muffler Mounting Hole Centers: 40.5mm
  • Height from Crankcase to end of Muffler Pipe Outlet: 286mm
  • Muffler Outlet Diameter: 30mm
  • Cylinder Head Exhaust Outlet Height: 13mm
  • Cylinder Head Exhaust Outlet Width: 27mm
  • Muffler Can Length: 214mm
  • Muffler Can Diameter: 50mm
  • Exhaust Pipe Diameter: 31mm
  • Exhaust Pipe Length: 152mm

Warranty for DLE Engine products are done directly through Chief Aircraft Inc

Complete the form above for warranty issues with DLE engines. You must request an RMA from customer service prior to shipping your engine back to the Chief Aircraft location in Grants Pass Oregon. Include the completed form and return it with the engine.

  • Horsepower: 21.5-HP/7500rpm
  • RPM: 1000-7500 RPM
  • Idle speed: 1000 rpm
  • Reccomended Props: 32x10, 32x12, 34x10
  • Displacement: 222.5cc
  • Bore and Stroke: 45mm×35mm
  • Compression Ratio: 7.6:1
  • Total Weight: 12.4 lbs (5610g)
  • Fuel: 30:1 mix ratio
  • Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
  • Replacement Sparkplug: NGK CM6 or equivalent
  • Requires: unleaded gasoline, 2-cycle oil, ignition batteries & propeller
  • Includes: Mufflers, Spark plugs, Gaskets, Bolts, Machined aluminum standoffs, Throttle arm extension
Dimensions
  • Total Width Including Both Cylinder Heads: 258mm not including spark plugs
  • Distance between Horizontal Mounting Hole Centres: 81mm
  • Distance between Vertical Mounting Hole Centres: 91mm
  • Height of Entire Mounting Plate: 107mm
  • Width of Entire Mounting Plate: 96mm
  • Length from Mounting Plate to Front Bearing: 228mm
  • Length from Mounting Plate to Prop Hub: 258mm
  • Height from Crankcase to top of Carburettors: 157mm
  • Distance between Muffler Mounting Hole Centres: 40.5mm
  • Height from Crankcase to end of Muffler Pipe Outlet: 286mm
  • Muffler Outlet Diameter: 30mm
  • Cylinder Head Exhaust Outlet Height: 13mm
  • Cylinder Head Exhaust Outlet Width: 27mm
  • Muffler Can Length: 214mm
  • Muffler Can Diameter: 50mm
  • Exhaust Pipe Diameter: 31mm
  • Exhaust Pipe Length: 152mm