Spark Dynamic F3A ARF

The new Spark Dynamic is here. It was changed and developed for better flight condtions and flying characteristics. It's rudder shape changed, the wings are set-up and the kit includes a clear canopy. The parts and materials have been upgraded. The overall flying weight has also been reduced. Now it's up to you to compare the originality, quality and capability of the SPARK DYNAMIC. There is no other plane like the SPARK in today's market! Another improvement was done to the front area of the fuselage. Smaller sized spinner and shallower angle at the bottom of the SPARK. Large removable canopy which begins few centimeters behind the spinner allows for an easy motor and battery installation.

Parts description:

Fuselage: Fully composite, Cabon Fiber Sandwich. Totally compact and incredibly light!

Canopy: Moved forward to increase fuselage area around C of G. This has imroved flying characteristics during a knife edge and all rolling circle manuevers.

Wings: This is where the most work has done......

Totally exlusive looks in F3A world. Final looks of the design after long experimenting with different platforms and airfoils. The main goal was to come up with something new and effective. The Wings you see are light, extremely strong and incredibily smooth in rough air. Part of the design is a system allowing for changing incidence. All composite structure with 30/1mm C/F tube and already mounted servo bays.

Elevator: Platform similar to wing design but with lighter materials.

All composite structure as well, allowing for installation of MINI servos inside the stabs.

Rudder: All composite as well with a new shape. Built with a piano hinge, instead of a wire as used on our large models. Control horns are above the stabs.

Landing Gear: Lightened c/f sandwich, i.e. strong and light. Very practical mounting and attaching. Tailwheel assembly is functional and easy to install.

Spinner: Make sure it is not more then 65mm diameter and no more then 45 mm long!

Canopy: Very light c/f and Styrofoam sandwich. Attaching is done by using 4 strong magnets.