MKS
MKS HV1220

HV1220 Digital High-Torque High Voltage Servo

HV1220 Digital High-Torque High Voltage Servo

In Stock
$101.24
Item Qualifies for Free Ground Freight (48 States) on Orders Over $150

HV1220 Digital High-Torque High Voltage Servo, with Titanium Gears, by MKS

  • Dead Band: 0.0008ms (Default)
  • Control System: +Pulse Width Control
  • Working Frequence: 1520μs / 333hz
  • (RX) Required Pulse: 3.0~8.4 Volt Peak to Peak Square Wave
  • Operating Voltage: 4.8~8.4 V DC Volts
  • Operating Temperature Range: -10 to + 60 Degree C
  • Operating Speed (7.4V): 0.129 sec/60° degrees at no load
  • Operating Speed (8.4V): 0.115 sec/60° dagrees at no load
  • Stall Torque (7.4V): 22.1 kg-cm (307 oz/in)
  • Stall Torque (8.4V): 23 kg-cm (319 oz/in)
  • Motor Type: Coreless Motor
  • Potentiometer Drive: Direct Drive
  • Driver Type: FET
  • Bearing Type: Dual Ball Bearings
  • Gear Type: Titanium Gears
  • Programmable: NO
  • Connector Wire Length: 15.0 cm (5.9 in)
  • Dimensions: 40X20X37 mm
  • Weight: 57.70 g ( 2.03oz)
  • Dead Band: 0.0008ms (Default)
  • Control System: +Pulse Width Control
  • Working Frequence: 1520μs / 333hz
  • (RX) Required Pulse: 3.0~8.4 Volt Peak to Peak Square Wave
  • Operating Voltage: 4.8~8.4 V DC Volts
  • Operating Temperature Range: -10 to + 60 Degree C
  • Operating Speed (7.4V): 0.129 sec/60° degrees at no load
  • Operating Speed (8.4V): 0.115 sec/60° dagrees at no load
  • Stall Torque (7.4V): 22.1 kg-cm (307 oz/in)
  • Stall Torque (8.4V): 23 kg-cm (319 oz/in)
  • Motor Type: Coreless Motor
  • Potentiometer Drive: Direct Drive
  • Driver Type: FET
  • Bearing Type: Dual Ball Bearings
  • Gear Type: Titanium Gears
  • Programmable: NO
  • Connector Wire Length: 15.0 cm (5.9 in)
  • Dimensions: 40X20X37 mm
  • Weight: 57.70 g ( 2.03oz)