Hysol E-20HP, High Strength Clear Epoxy Adhesive, Slow Cure, 50ml, by Loctite

Requires Loctite Hysol Glue Gun or equivalent system to properly apply epoxy

Hysol 9462 vs E-20HP - the differences

• Hysol 9462 is white, E-20HP is clear
• Hysol 9462 is totally thixotropic - i.e. it will not run or sag. E-20HP is slightly less thixotropic - thus it may penetrate some materials better.
• Hysol 9462 initial setup time is about 3 hours at 75°F. E-20HP initial setup time is about 1 hour at 75°F.
• Technical data on the strength properties of both glues render them about the same.
• Hysol 9462 and/or E-20HP are Aerospace grade adhesives and the strongest epoxy based glues available to the modeler.