Thunder 3D Dance Red Scheme ARF, by Krill Models
Click Here to Download Instruction ManualThe Thunder 3D has been in the works for quite some time and Krill wanted to make sure that they brought something new and special for the new FAI category & F6A Artistic aerobatics. Thunder 3D is highly specialized and purposely build model for 3D flying. As you can see on the pictures, Krill has implemented many new ideas, including a new wing platform and airfoil.
Thunder 3D is NOT meant for beginners and/or learning 3D flying!! You should have at least some knowledge of 3D flying to fly this airplane. On the other hand it will surprise you by it's maneuverability and endless possibilities in 3D flying.
All composite kit includes: fuselage, cowl, rudder, elevators, wings, canopy, landing gear, wheel pants, CNC engine mount, screws and bolts, CNC f/g control horns, c/f wing tube, instructions.
Recommended servos:
Wings - 1 per aileron, digital, fast and at least 7kg ( 100 oz.in)
Elevators - only 1 servo is needed. At least 7kg ( 100 oz.in), with metal gears.
Attention: pull pull system is used for elevator control.
Rudder - 1 servo, digital and fast. At least 10kg ( 200 oz.in).
- Wingspan: 75.6" (1.92m)
- Length: 70.8" (1.9m)
- Flying Weight: 36 lbs
- Propeller: APC 19x10 , 20x8 , 21x10
- Engine: 20-30cc, Perfect for DLE-30 or MLD-28
- Required: 6 channel radio & 4-5 servos
- Electric
- HACKER A60-22S , Master SPIN 99 , Lipo 10s, 3700mAh, APC 20x10E
- AXI 5325/16 , JETI SPIN 99 , Lipo 6s, 4400mAh, Carbon 22x10E
Secure Card Transactions
![]() |
Chief's Secure Ordering
Online Orders: | Our Site is Secure! |
Aircraft / Avionics Orders: | (800) 447-3408 |
Radio Control Orders: | (877) 219-4489 |
24 Hour Fax: | (541) 479-4431 |




Chief's Customer Service
Customer Service: (800) 447-3408