Highest Quality Products Coast to Coast

 
Aircraft
Engine Data Monitor 800 System, 4 Cylinder

Engine Data Monitor 800 System, 4 Cylinder

 

Item:   JPI EDM800-4C
Price: $2,995.00 
Item Qualifies for Free Ground Freight (48 States) on Orders Over $500
Add to Cart

Engine Data Monitor 800 System, 4 Cylinder, JP Instruments


EDM-700/800/740 (EXP), EDM-730/830, EDM 760/790 Twin Order Form

Configuration & Option questionnaire must be completed prior to shipping

EDM-700/800/740 (EXP) Pilots Guide


ALL EDM SYSTEMS are TSO’d and INCLUDES as free:

  • LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder to peak
  • Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate
  • Voltage, For alternator failure, monitored for over and under voltage with alarms
  • Pilot Programmable Hi & Lo alarm limits. ALL programming from front panel
  • All EDM’s TSO’d for quality with a 3 yr. Warranty on the Electronics
  • Quick response probes, fastest accurate readings, pre-made harness and hardware
  • Data Memory, reading once every 2 to 255 seconds
  • EZPlot-1 program for plotting and downloading data
  • USB download port built in with memory stick (730/830/790/900 Only)
  • Full color TFT screen 4 inches Diagonal (730/830/790/900 Only)
Think of the EDM 800 as your personal flight engineer. It’s always there, working in the background, constantly watching over your engine while you concentrate on flying the aircraft. The EDM 800 adds fuel flow and a host of additional features to the legendary EDM 700. Leaning is accomplished quickly and automatically using the LeanFind™ procedure. With the EDM it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.

Standard Functions of the EDM-800:

  • EGT 4 or 6 probes
  • CHT 4 or 6 probes
  • Volts
  • Shock cooling on ALL cylinders
  • LOP/ROP JPI Exclusive Leaning Mode
  • Fuel Flow (USED, Remaining, GPHEndurance, GPS destination)
  • RPM
  • MAP
  • OAT
  • %HP (Requires: OAT, RPM, MAP, & FF )
  • All required Harnesses
  • EZTrends Charting and download Software free
  • Serial Data recording
  • 3 year Warranty

Optional Functions of the EDM-800:

  • Oil Pressure
  • Oil Temperature
  • TIT
  • CDT
  • IAT
  • CARB Temperature
  • Download box with Memory stick
  • USB built-in with Memory stick
The EDM 800 records, ALL 29 functions, every 6 Seconds, for up to 25hrs., or every minute for 550 hrs., including fuel used. Data downloads to any computer. USB port optional.

Percent of Horse Power, This is not a for-show calculation. It is an accurate calculation using OAT, RPM, MAP and Fuel Flow, accurate for LOP Complete fuel flow system. Not like brand-x that only displays GPH and you have to buy a second instrument to see the rest. True data recording that works. Record rate adjustable from every 2 to 255 seconds. ROP and LOP Mode. The only true LOP where you see each cylinder as it goes over lean. TSO Quality. Brand-x offers a 1 year warranty and a 3 yr. extended warranty at a cost of $129. JPI offers everything Brand-x offers FREE. EZTrends JPI Charting software is Free. Brand-x offers download software free. Well how do you Chart the data? You pay $125 for Charting software. RPM, Manifold pressure with sensor, Outside Air Temp. with probe. The EDM-800 or 700 can be a Primary Replacement for CHT, OIL temperature and Turbine Inlet Temperature at which time the model is changed to EDM-711.
  • PROBE RESPONSE: JPI’s probes are so sensitive that they respond to every temperature change. JPI’s fine tip, high response, grounded EGT probes are made of a space age metal. Hastaloy-X is a superior metal to stainless steel probes. Massive ungrounded probes can not respond to fast temperature changes like leaning an engine.
  • EDM’s are the only bargraph instruments that have met the harsh environmental standards of FAA,TSO. All of JPI’s EDM’s are TSO’d for Quality, with a three year warranty.
The EDM 800 displays temperature digitally and in analog format. The EGT as displayed is based on probes located near the exhaust outlet for each cylinder and the TIT probe, if installed, is adjacent to the turbo charger.

JPI EDM-800 Features (some functions may be optional**):

  • Hands-free, automatic scanning (711: primary only)
  • All programming done from the Front Panel
  • LeanFind™ finds the first and last cylinder to peak with true peak detect —eliminates a false peaks
  • Displays both leaned temperature below peak and peak
  • Battery voltage with alarm
  • 24 Programmable alarm limits
  • Normalize view
  • DIF low to high EGT with alarm
  • EGTs to stable 1°F resolution
  • Shock cooling monitored on every cylinder
  • User selectable index rate
  • Fast response probes
  • Non-volatile long term memory
  • Records and stores data up to 30 hours
  • Post-flight data retrieval
  • Download to Palm™ Computer
  • Data retrieval software
  • FAA Approved as primary temperature instruments for CHT, OIL, TIT
  • RPM
  • MAP
  • Oil temperature **
  • Turbine inlet temperature**
  • Outside air temperature**
  • Compressor discharge temperature**
  • Carburetor temperature**
  • Fuel Flow
  • Solid-state rotor fuel flow transducer
  • Fuel quantity in gallons, kilograms, liters, or pounds
  • Low fuel quantity alarm
  • Low fuel time alarm
  • GPS interface
  • Instantaneous fuel flow rate
  • Total amount of fuel consumed
  • Total fuel remaining
  • Time to empty at the current fuel flow rate
  • 2.615” x 2.615” x 7.1” Depth
  • 2 1/4” or 3 1/8” Mount., 13 oz. Unit
  • Resolution. Accuracy: Plasma display viewable in direct and indirect sunlight
  • FAA Approved under TSO-C43B
  • EGT 4 or 6 probes
  • CHT 4 or 6 probes
  • Volts
  • Shock cooling
  • LOP/ROP JPI Exclusive Leaning Mode
  • Fuel Flow (USED, Remaining, GPH
  • Endurance, GPS destination)
  • RPM
  • MAP
  • OAT
  • %HP (Requires: OAT, RPM, MAP, & FF )
  • All required Harness
  • EZTrends
  • Serial Data recording
  • 3 year Warranty
  • Optional functions: Oil Pressure, Oil Temperature, TIT, CDT, IAT, CARB Temperature, Download box with Memory stick, USB built-in with Memory stick

There are no field adjustments and or calibration requirements for the EDM 800 series instrument after initial installation. ICA is not required. Maintenance of non functioning or malfunctioning components is limited to removal and replacement of JPI factory supplied new or repaired components as described in the troubleshooting section of the installation instructions.

Fuel Flow: Resolution to 0.1 all functions, Fuel flow Gals/Liters/Lbs/Kg., Fuel Used to 0.1 gal., Auxiliary tanks included, Endurance in Hrs..Min, GPS works with hand held, Response 3 seconds, K factor set from front panel, K factor 10,000 to 100,000, Low fuel alarm w/remote, Low time alarm w/remote, Max fuel flow 140 GPH (k=85) to 410 (K=29)

Standard Functions of the EDM-800:

  • EGT 4 or 6 probes
  • CHT 4 or 6 probes
  • Volts
  • Shock cooling on ALL cylinders
  • LOP/ROP JPI Exclusive Leaning Mode
  • Fuel Flow (USED, Remaining, GPHEndurance, GPS destination)
  • RPM
  • MAP
  • OAT
  • %HP (Requires: OAT, RPM, MAP, & FF )
  • All required Harnesses
  • EZTrends Charting and download Software free
  • Serial Data recording
  • 3 year Warranty

Optional Functions of the EDM-800:

  • Oil Pressure
  • Oil Temperature
  • TIT
  • CDT
  • IAT
  • CARB Temperature
  • Download box with Memory stick
  • USB built-in with Memory stick
Chief Aircraft Logo

The best service and prices, with the largest inventory & fastest shipping. Serving aircaft owners, pilots & RC modellers for 30 years.

Grants Pass Airport
1301 Brookside Blvd. - Grants Pass, OR 97526
West Coast Store: Mon-Fri 7am-5pm Pacific Standard Time

Deland Airport
813A Flightline Blvd. Ste. 1 - Deland, FL 32724
East Coast Store: Mon-Fri 8:30am-5:30pm, Eastern Standard Time

Secure Card Transactions

USA ePay

Chief's Secure Ordering

Online Orders:Our Site is Secure!
Aircraft / Avionics Orders:(800) 447-3408
Radio Control Orders:(877) 219-4489
24 Hour Fax:(541) 479-4431
Master Card Logo Visa Logo American Express Logo Discover Logo

Chief's Customer Service

Customer Service: (800) 447-3408

Customer Service Request Form

Customer Service Info

Business Hours

E-mail & Phone Numbers