Highest Quality Products Coast to Coast

 
Aircraft
Engine Data Monitor 700 System, 6 Cylinder

Engine Data Monitor 700 System, 6 Cylinder

 

Item:   JPI EDM700-6C
Price: $1,570.00
After $100 Rebate
List: $1,990.00
Item Qualifies for Free Ground Freight (48 States) on Orders Over $500
Add to Cart

Engine Data Monitor 700 System, 6 Cylinder (6-EGT and 6-CHT), JP Instruments


EDM-700/800/740 (EXP), EDM-730/830, EDM 760/790 Twin Order Form

Configuration & Option questionnaire must be completed prior to shipping

EDM-700/800/740 (EXP) Pilots Guide


ALL EDM SYSTEMS are TSO’d and INCLUDES as free:

  • LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder to peak
  • Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate
  • Voltage, For alternator failure, monitored for over and under voltage with alarms
  • Pilot Programmable Hi & Lo alarm limits. ALL programming from front panel
  • All EDM’s TSO’d for quality with a 3 yr. Warranty on the Electronics
  • Quick response probes, fastest accurate readings, pre-made harness and hardware
  • Data Memory, reading once every 2 to 255 seconds
  • EZPlot-1 program for plotting and downloading data
  • USB download port built in with memory stick (730/830/790/900 Only)
  • Full color TFT screen 4 inches Diagonal (730/830/790/900 Only)
Think of the EDM 700 as your personal flight engineer. It’s always there, working in the background, constantly watching over your engine while you concentrate on flying the aircraft. You can make an entire flight without ever pushing a button, if you so choose. Yet your EDM-700 will be monitoring your engine parameters three times a second and will warn you instantly if any parameter exceeds the programmed limit.

Standard Functions of the EDM-700:

  • EGT/CHT
  • Shock Cooling
  • Voltage
  • Differential EGT
  • Normalize
  • Long term data module for Data Logging

Optional Functions of the EDM-700:

  • Fuel Flow
  • Oil Temperature
  • Turbine Inlet (TIT) 1 & 2
  • Outside Air (OAT)
  • Induction Air (IAT)
  • Compressor Discharge (CDT)
  • Oil Pressure
  • RPM
  • and Carb
Leaning is accomplished quickly and automatically using the LeanFind™ procedure. With the EDM it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.

Accuracy and Resolution, are two of the most misunderstood terms in instrumentation. Because an instrument displays 1 degree increments (resolution) does not mean it is accurate to 1 degree. JPI’s accuracy comes from its linearized thermocouples. Other’ put and estimating straight line through the center of the thermocouple calibration “S” curve. With this method the instrument is accurate at only three points along as the the straight line crosses the “S” curve. Therefore errors of +/- 10′ are quite possible while still displaying in 1degree resolution. Our competition is advertising +/- 1/2′ accuracy at full scale. This would mean that =/-1/2′ of 2000′ (full scale) is +/- 10′; there is a big difference. JPI has found nothing in the Aviation market that compares to our linearized accuracy.

The Engine Data Management 700 system is the most advanced and accurate piston engine-monitoring instrument on the market. Using the latest microprocessor technology, the EDM will monitor up to twenty-four critical parameters in your engine, four times a second.

JPI EDM-700 Features:

  • Computer Assisted Diagnostics for troubleshooting the entire system from the cockpit. Problem codes are displayed.
  • All programming done from the Front Panel, using two simple buttons.
  • 29 Alarms, including EGT Differential, Alternator Voltage, Fuel Flow and Shock Cooling.
  • Variable Scaling of EGT Bar Graph.
  • LeanFind™ Mode automatically identifies the first and last cylinder to peak and PeakFind™ with quick responding probes, automatically captures the EGT or TIT peak value.
  • Data Port, True memory, is included FREE within each EDM (competition,s UBG-16 sells for $375 in a second add on box). This memory will permit down loading of data from the EDM to a laptop or Palm® computer. Palm® software is free on the JPI web site. Record interval is adjustable from 2 to 500 seconds or 25 to 1000 hrs. Records 26 functions not 16 like UGB-16. Record rate 2 to 255 seconds.
  • Fuel Flow option, the only graphic engine monitor with a complete fuel flow system. FAA approved for all EDMs including 9 cylinder Twins. This format frees up valuable panel space.
  • Resolution, all temperatures display in ONE degree ( note, even EGT) Pilot selectable to display in oC or oF. OAT option can be in oC or oF.
  • JPI’s well known “Grounded” fast response probes for quick accurate leaning.
  • Shock cooling, cooling rate checked on each and every cylinder. Maximum cooling rate shown in degrees per minute. Dot over column identifies cylinder with highest cooling rate. The UBG-16 checks only ONE cylinder on a 6 cylinder engine.
  • Normalize Mode for accurate trend monitoring. Bars are in 10o increments.
  • Alphanumeric scanning display of 29 functions or channels not 16 like UGB-16.
  • Bus voltage Detects voltage loss due to alternator failure. IFR must. Free on all EDMs – Option on UBG-16
  • Oil temperature option in one degree increments and checked against an upper and lower limit.
  • TSO’d for Quality and Reliability with FAA, STC approved Fuel Flow. None of the competition is TSO’d. TSO quality permits JPI to offer a Three year Warranty.
Specifications:
FAA Approved underTSO-C43B, DO-160C, DO-178B Level C & STC, SA 2586 NM
Size2.615” x 2.615” x 7.1” Depth.
2 1/4” or 3 1/8” Mount.
13 oz. Unit
Resolution. Accuracy: Plasma display viewable in direct and indirect sunlight.
  • EGT 4 or 6 probes
  • CHT 4 or 6 probes
  • Volts
  • Shock cooling
  • LOP/ROPJPI Exclusive Leaning Mode
  • Power connector
  • All required Harness
  • EZTrends
  • Data recording-100 hrs. Download USB
  • Selectable Positions for Linear gauges
  • 3 year Warranty
  • The EDM 700 automatically accommodates both 14 and 28 volt electrical systems.
  • TSO C43b, Temperature Indicator EGT-701 14.5 oz ./ 0.9 lbs
  • EGT probe MM-111 2.0 oz. each / 0.125 lbs
  • CHT probe 5050 1.5 oz. each / 0.094 lbs
  • Wire P.N. WK.-24 Harness 8 ft. 14.0 oz. each / 0.88 lbs
  • RPM 1.5 oz / .094 lbs
There are no field adjustments and or calibration requirements for the EDM 700 series instrument after initial installation. ICA is not required. Maintenance of nonfunctioning or malfunctioning components is limited to removal and replacement of JPI factory supplied new or repaired components as described in the troubleshooting section of the installation instructions.

Standard Functions of the EDM-700:

  • EGT/CHT
  • Shock Cooling
  • Voltage
  • Differential EGT
  • Normalize
  • Long term data module for Data Logging

Optional Functions of the EDM-700:

  • Fuel Flow
  • Oil Temperature
  • Turbine Inlet (TIT) 1 & 2
  • Outside Air (OAT)
  • Induction Air (IAT)
  • Compressor Discharge (CDT)
  • Oil Pressure
  • RPM
  • Carb Temp
Chief Aircraft Logo

The best service and prices, with the largest inventory & fastest shipping. Serving aircaft owners, pilots & RC modellers for 30 years.

Grants Pass Airport
1301 Brookside Blvd. - Grants Pass, OR 97526
West Coast Store: Mon-Fri 7am-5pm Pacific Standard Time

Deland Airport
813A Flightline Blvd. Ste. 1 - Deland, FL 32724
East Coast Store: Mon-Fri 8:30am-5:30pm, Eastern Standard Time

Secure Card Transactions

USA ePay

Chief's Secure Ordering

Online Orders:Our Site is Secure!
Aircraft / Avionics Orders:(800) 447-3408
Radio Control Orders:(877) 219-4489
24 Hour Fax:(541) 479-4431
Master Card Logo Visa Logo American Express Logo Discover Logo

Chief's Customer Service

Customer Service: (800) 447-3408

Customer Service Request Form

Customer Service Info

Business Hours

E-mail & Phone Numbers