Sometimes, all it takes to turn jitters before a maneuver into an "Ahhh!" afterwards is just a little bit more power from your pack. That requires getting the most from each cell - and that's where ElectriFly excels.
Top-quality Power Series LiPo packs discharge at an impressive 20C rate. And now, they're available in balanced packs which allow you to equalize (balance) the voltage of each cell in a pack.
The Equinox LiPo Cell Balancer offers two easy ways to equalize cells and maximize pack performance. Connect it directly to a balanced pack, and it's a gentle cell-by-cell discharger. It starts by bringing the voltages of all cells into balance, and then monitors each cell until it's completely discharged. As a result, the voltages of individual cells end up within just a few millivolts of each other. Connect the Equinox between a balanced pack and a LiPo charger, and it brings all cells into balance at the same voltage, before charging each cell to its absolute, individual peak of power. Using the Equinox LiPo Cell Balancer to discharge or charge is good. Doing both not only ensures maximun voltage from the pack, but longer pack life, as well.
- Easy, push-button operation
- Automatically checks for "bad" cells
- Charges at up to 3A
- Adapters for 7.4V and 11.1V packs included.
- 8 status LEDs for easy monitoring
- Includes gold-plated banana plugs
- Compact: 3.2 x 1.6 x 0.6 in (82 x 40 x 15 mm)
- Lightweight: 1.55 oz (44 g)
|Compatible chargers/dischargers: LiPo chargers and dischargers ONLY (operation based on normal cell voltage of 3.7V per cell)Cell balancing range: 2-series to 5-series LiPo packs (7.4 - 18.5V)Discharge cut-off voltage: 2.75V per cell in Quick-Balance Mode3.0V per cell in Interface Mode (with separate discharger)||Quick-Balance discharge current: 120mAInterface Mode maximum current: 3 ampsOverload protection: 7.5 amp auto (spade) fuseDimensions: 3.23 x 1.57 x 0.59 in. (82 x 40 x 15 mm)Weight: 1.55 oz. (43.8 g)|