E-Flite Cap 232 BP ARF

The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer.

• Ingenious open-structure balsa/light-ply design minimizes weight and maximizes strength
• Light wing loading and large control surfaces for astonishing freestyle and 3D capability
• 90% pre-built and covered in UltraCote
• Carbon fiber pushrods
• All hardware is included
• Out-of-the-box compatibility with E-flite outrunner or inrunner brushless motors
• Outrunner Stick Mount included

Part No.	Description	CART	Price
EFL 2400	Electric Airplane CAP 232 BP ARF, E-Flite	ADD	$99.99

The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer. It's all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wood airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote® and UltraCote Lite so you can be up and flying in no time.

Needed to Complete:

• 6-channel transmitter (for proper mixing and dual rate capabilities)
• Micro receiver
• 4-sub micro servos
• motor
• 20A brushless ESC
• 11x3.8 Slow flyer prop
• Battery & Charger

Specifications:
Wingspan: 35.5" (900mm) Length: 35.5" (900mm) Wing Area: 425 sq in Weight: 15.5-17 oz Radio: 6 channels (for proper mixing) Servos: 4 sub-micro	Motor Size: Park 450 or Park 400 Prop Size: 11x3.8 Slow Flyer Speed Control: 20A Brushless Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Po