VIEW SHOPPING CART | TRACKING | CONTACT US | POLICY | MODEL CATALOG  

Hyperion Categories

Power Packs

Mounts

Accessories

Power Packs

Hyperion Z4035-14 Power Pack

Part No.PHOTODescriptionCARTPrice
HYP 4035-PAC   Brushless Motor, Z4035-14, Prop Adapter and Titan 85A HV ESC, Hyperion
 ADD 
 $289.95*
HYP 4035-PAC2
 PHOTO 
 Brushless Motor, Z4035-299, Prop Adapter and Titan 85A HV ESC, Hyperion
 ADD 
 $289.95*
Prices With * Include Ground Freight (48 States).

Hyperion Z4035-14 Motor with Titan 85A HV ESC

HYPERION Z4035 Series Brushless OutRunner Motors. Stator measures 40mm Dia x 35mm Length. Extremely powerful, yet reliable and smooth due to the support of large ring bearing at bell front. Z4035 Series is intended for Large Electric models and IC Engine conversions in the range of Glow 46 to Four-Cycle 91, using 5S to 6S lithium typically, or up to 8S with Z4035 14T version. We prefer to use 3200 to 3700mAh 15C~20C batteries in the range of 30A to 60A, and increase cell count if more watts in are needed. This not only increases motor efficiency, it keeps the battery simple (no parallel connections) and reduces project cost.

Hyperion TITAN 85A HI-PRO Brushless ESC OPTO (no bec) 16-30 NiX, 5S-10S lipo (No Heli Governor Mode)

Top of page

Mounts

Hyperion Z40 Front Motor Mount

Part No.PHOTODescriptionCARTPrice
HYP Z40 MNT
 PHOTO 
 Motor Mount, Z40 Front Mount, Hyperion
 ADD 
 $19.95 

MOTOR MOUNT for Hyperion Z40 Series, or any other motor/gearbox with 25mm mounting pattern.

Intended for Hyperion Z40 Series motors, the mount has two sets of motor mounting holes with 25mm spacing. The holes are M4 to match Z40 and other large motors, so if mounting a motor with M3 screws we recommend using countersunk-head screws, to maintain proper centering. Total weight of the mount with all hardware is 130g. Adjustable for lengths from 85mm~135mm.

Includes:

  • (1) Front Plate
  • (2) Side Plates
  • (8) M4 x 12mm Allen-Head Screws
  • (8) Nyloc M4 Nuts
  • (4) M4 x 20mm Allen-Head Screws
  • (4) M4 Blind Nuts

Top of page

Hyperion Z40 Back Motor Mount

Part No.PHOTODescriptionCARTPrice
HYP Z40 BKMNT
 PHOTO 
 Motor Mount, Z40 Back Mount, Hyperion
 ADD 
 $27.95 

BACKMOUNT DELUXE SET (Radial Mount) for Hyperion Z40 Series Motors

Set contains everything you need to mount your Z40 Series Hyperion Motor in BackMount (radial) fashion to the model's firewall.

Includes:

  • (1) Aluminum BackMount Plate
  • (1) Aluminum Backmount Prop Adapter (for M8 Prop Shaft)
  • (1) Setscrew Retaining Collar M6
  • (1) Aluminum Spacer Set (spacing adjustable from 5mm to 30mm max)
  • 4x 5mm spacer
  • 4x 10mm spacer
  • 4x 15mm spacer
  • (1) Mounting Screw Set (4mm Allen Head type)
  • 4x 25mm
  • 4x 30mm
  • 4x 50mm
  • (4) 4mm Blind nuts

Top of page

Accessories

Hyperion Propeller Adapters

Part No.PHOTODescriptionCARTPrice
HYP ADAP 8-60XL   Prop Adapter, 6.0mm Collet Adapter M8, Hyperion
 ADD 
 $8.95 

8-60XL - Hyperion LONG 6.0mm Collet PROP ADAPTER M8

Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. This is a large, strong adapter for props in the 10" to 22" range, with 8mm center hole. Made to fit 6mm motor and gearbox shafts, with suffcient length to mount large APC E and SPORT props, and also a spinner if desired. 3mm hole in end of adapter allows mounting of various spinners.

Hyperion Z3007 Motor Shaft

Part No.DescriptionCARTPrice
HYP Z3007 SFT Motor Shaft, for Z3007 Motor, Hyperion
 ADD 
 $4.00 

Top of page

Hyperion Gold Connectors

Part No.DescriptionCARTPrice
HYP CONN403MF Gold Connectors, Set of 3 with Shrink, 4.0mm Long, Hyperion
 ADD 
 $4.80 

Top of page