SteinAir "Eyeball" Cockpit Swivel Type Air Vents

Part No.	PHOTO	Description	CART	Price
STA AV125B	PHOTO	Eyeball Vent, 1 1/4" Anodized Black Aluminum, SteinAir OD is 2" (hole size required for mounting).	ADD	$115.00
STA AV125C	PHOTO	Eyeball Vent, 1 1/4" Anodized Clear Aluminum, SteinAir OD is 2" (hole size required for mounting).	ADD	$115.00
STA AV1625B	PHOTO	Eyeball Vent, 1 3/4" Anodized Black Aluminum, SteinAir OD is 2 2/3" (hole size reqired for mounting). Includes 2" plenum cup.	ADD	$125.00
STA AV1625C	PHOTO	Eyeball Vent, 1 3/4" Anodized Clear Aluminum, SteinAir OS is 2 3/4" (hole size required for mounting). Includes 2" Plenum Cup.	ADD	$125.00

These eyeball vents are far superior in thier construction to those seen elsewhere are are of much higher quality. These are the highest quality vents that money can buy. For example, the Black Vents are 100% anodized aluminum...and unlike the overpriced and low quality vents produced elsewhere, these plack vents don't require a "Plastic Flange" because of metal to metal contact. That's a sign of poor quality construction with metal on metal contact. These high quality vents have a nylon/delrin busing encapsulated between the eyeball and the flange to protect the aluminum. On top of that , the larger vents sold elsewhere reqire a three inch mounting pattern... 4 bolts which is much larger than need be. With these vents you simple cut a hole, install the vent and tighten the plenum or retaining nut behind it and hook up the tubing.

These vents include everything needed for install...no need to try and cobble together your own plenum or flange for scat tubing. On the small vents you can just directly attach a 2" scat tube to the vent - and on the large vents they have 2" plenums. These will come with a "BAC" part number on them, but that's because they are normally for the cockpits of fighters... you can figure out what the initials are for.

• Smaller 1.25" Vents (Anodized Black or Clear Aluminum)
• Larger 2" Vents (Anodized Black or Clear)

Wemac Eyeball Air Vent

Part No.	PHOTO	Description	CART	Price
WEM 2230-01	PHOTO	Eyeball Vent, 7/8" outlet, Aluminum with checked collar, Wemac Division Swivels to direct air volume where needed. Hard clear anodized finish. 7/8" outlet. Mounts in 1 15/16" hole.	ADD	$204.95
WEM 2373-1	PHOTO	Large Eyeball Vent, 1 1/4" outlet, Aluminum, Wemac Division	ADD	$188.50
WEM 2373-1B	PHOTO	Large Eyeball Vent, 1 1/4" outlet, Anodized Black, Wemac Division	ADD	$168.50
WEM VS	PHOTO	Adapter Vent Shroud, Wemac Division for 2" SCAT air duct. Attaches to rear of Eyeball Vent.	ADD	$15.95