VIEW SHOPPING CART | TRACKING | CONTACT US | POLICY | FREE CATALOG  

Aircraft Jumper Cables

Part No.PHOTODescriptionCARTPrice
ASOC 6141 Jumper Cables, Cessna 3 Pin Plug, Associated Equipment
Beech, Cessna, Mooney, Grumman 3-pin oval
$174.95  
ASOC 6142 Jumper Cables, Piper Coaxial Plug Single pin, Associated Equipment $204.95  

Aircraft Jumper Cables are made from heavy duty #4 multi-strand copper cable. Tested in temperatures down to 50° below zero. 500 amp clamps are spring loaded to prevent slip-off. Plastic coated to eliminate arcing or sparks. 15 foot cables make excessive maneuvering of source battery unn


ecessary. These are the absolute finest jumper cables available! 9 Lbs.

External AN 2552-3A Oval Power Receptacle

Part No.PHOTODescriptionCARTPrice
ASOC 4621B Power Receptacle, External NA 2552-3A Oval, Associated Equipment $67.75  

AN2552-3A – Oval Shaped, 3 -pin external power receptacle, designed to mount in opening in the skin of aircraft. Used on Beech, Cessna, Mooney, Grumman. Mates with AN2551 type plugs. See below. Dim: 3 3/16" x 1 3/4" x 2 5/8". 1 Lb.


Oval Power Plug

Part No.PHOTODescriptionCARTPrice
ASOC 6216 Power Plug, 3 Pin Oval, Associated Equipment $54.95  

3-pin oval female plug equivalent to AN2551. Used on Beech, Cessna, Mooney, Grumman. Unbreakable lexan construction with silver-plated copper sleeves. 1 Lb.


Piper-Type Plug

Part No.PHOTODescriptionCARTPrice
ASOC 6217 Power Plug, Coaxial Piper Type, Associated Equipment $49.95  

Single pin female plug mates with Piper type male socket. Superior in life and performance. Cables require soldering. 1 Lb.

PLUG AND JUMP

CESSNA

Part No.PHOTODescriptionCARTPrice
CA 311807 Plug and Jump Cessna, Chief Aircraft $69.00  

Plug & Jump allows you to use standard jumper cables to jump start or run accessories. Used on Beech, Cessna, Mooney, Grumman. Fits standard AN2552-3A Oval 3 pin power receptacle. For 14 or 28V systems depending on battery source.

May not work for all aircraft - check Manufacturer for application.

FREAS BATTERY HYDROMETER

Part No.PHOTODescriptionCARTPrice
FREAS 1 Battery Hydrometer, Freas $24.50  

The FR-1 is a small battery hydrometer with a float range of 1,000 to 1,300 specific gravity and is used to determine the state of charge in the battery. 1 Lb.

Battery Chargers

CM1A -1 amp, 12 volt Automatic Battery Charger/Maintainer

Part No.PHOTODescriptionCARTPrice
SCH CM1A   Battery Charger/Maintainer, Automatic, 1A, 12V, Schauer $27.95  

PHOTO

  • 1 Amp 12 Volt
  • Keeps batteries charged in stored vehicles.
  • 120 VAC 60Hz
  • One amp fully automatic battery charger.
  • Indicator lights:
    red - power on.
    yellow - charging.
    green - charged switched to float mode
  • Fully automatic, can be left on the battery indefinitely
  • Easily keeps batteries charged in stored vehicles
  • Overload protection
  • Charges, maintains, & conditions batteries
  • Reverse polarity protected. Requires minimum of 5 volts from battery to start charger
  • For any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, valve regulated batteries
  • Molded plastic case plugs into outlet
  • Ten foot long DC cordset includes quick change battery clips and ring terminals
  • UL/cUL listed
  • Dimensions: 2.6"W x 3.8"H x 2.2"D

MP1012 & ML524 - 12/24 volt Automatic Battery Chargers/Maintainers

Part No.PHOTODescriptionCARTPrice
SCH MP1012   Battery Charger/Maintainer, Automatic, 12V, Schauer $174.95  
SCH ML524   Battery Charger/Maintainer, Automatic, 124V, Schauer $184.95  

PHOTO - MP1012 12V Shown

Fully automatic can be left on the battery indefinitely.

  • Automatic Charge control: modified constant voltage charge to a cyclic finishing voltage then to a float standby.
  • Cyclic and float voltages are temperature and voltage compensated.
  • Can be used with any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, valve regulated batteries.
  • Full load at 2.1 volts per cell continuous 100% duty cycle.
  • Finishing voltage: 2.26 volts per cell float; 2.4 volts per cell cyclic. May be preset to customer’s specification. Draws no more than 400 microamps when AC power is off.
  • 10 Amp 12 Volt Multi Mode Automatic Temperature Compensated Battery Charger
  • 5 Amp 24 Volt Fully Automatic Battery Charger
  • 117/230 VAC 50-60 Hz
  • Temperature compensation, current and voltage.
  • Regulated bulk charge voltage.
  • Regulated float voltage.
  • Low temperature rise on batteries.
  • Low battery voltage start 5 volts.
  • Auto restart on low battery or AC off.
  • Turn on delay 1 sec, soft start (ML & MP).
  • AC/battery connection indicator.
  • Auto compensates for most lead acid battery types.
  • Automatic long term charging (unattended).
  • 80% charge indicator.
  • LED indicates end-of-charge.
  • LED charge indicator.
  • Short circuit proof.
  • Reverse polarity proof.
  • Primary protection in transformer.
  • Auto-electronic DC current limit (MP & ML).
  • Battery fault time out indicator (ML524).
  • Carrying handle.
  • Select cordset type at time of order.
  • Case lot of 4 weighs 40 lbs.
  • 2 year limited warranty.
  • Stronger welded construction, aluminium or copper heatsinks.
  • Dimensions: 6.5"W x 5.5"H: x 6.25"D (MP1012).

JAC22512 & JAC2024H - 12/24 volt Automatic
Battery Chargers/Maintainers/Ground Power Supplies

Part No.PHOTODescriptionCARTPrice
SCH JAC2512C   Battery Charger/Maintainer/Ground Power Supply with Cessna Plug, Automatic, 12V, Schauer $209.95  
SCH JAC2512P   Battery Charger/Maintainer/Ground Power Supply with Piper Plug, Automatic, 12V, Schauer $189.95  
SCH JAC2024HC   Battery Charger/Maintainer/Ground Power Supply with Cessna Plug, Automatic, 24V, Schauer $289.95  
SCH JAC2024HP   Battery Charger/Maintainer/Ground Power Supply with Piper Plug, Automatic, 24V, Schauer $229.95  

2512 12V PHOTO - 2024H 24V PHOTO

  • 25 Amp 12 Volt or 20 Amp 24 Volt
  • 3 Stage Automatic Battery Chargers
  • Connectors for Cessna or Piper
  • 100-240 VAC 50/60Hz
  • Charge control: constant current charge to a constant voltage, then to a float standby.
  • Current limiting.
  • Fully automatic, 3 stage charger can be left on the battery in maintaining/float mode.
  • Can be set for any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, valve regulated batteries.
  • Dimensions: 10"W x 7.5"H x 3"D
  • Cyclic Voltage: 2.5 volts/cell for 24 volt batteries; 2.6 volts/cell for 36 & 48 volt batteries. May be preset to customer's specification for battery type.
  • Low voltage start: will start charging a deeply discharged battery with terminal voltage less than 4 volts.
  • Reverse polarity and short circuit proof.
  • Aluminum case.
  • Green LED indicates AC power on, yellow LED indicates battery is charging, yellow LED off indicates float mode.

Activator 282 - 24V Battery Charger/Maintainer

Part No.PHOTODescriptionCARTPrice
CA 4105N Battery Charger Activator, Chief Aircraft $889.00  

PHOTO Front

The Activator 282 charger is designed to mate directly with all 24 volt batteries which have the standard aviation quick-disconnect receptacle.

  • The 282 will provide a full charge, completely automatic, then revert to a float (also called maintenance charge).
  • An accessible selector allows use with either Nickel Cadmium, Sealed Lead Acid, or Vented Lead Acid batteries.
  • Charge Method is optimum for battery performance and safety, and meets all battery manufacturers' charging requirements.
  • One Year Factory Warranty

Specifications:

Horizontal Dimension: 4.25L x 2.25W x 1.5H

Vertical Dimension: 3.2 x 3.1 x 3.0 D

Weight: 20 oz without line cord.

AC Input: 90-260 VAC 47-63 HZ, 1A MAX

AC Inlet: Standard IEC receptacle – 3 wire grounded.

Mates with USA and international IEC line cords.

Internal AC fuse protection.

AC Line Cord: Provided. 6 ft 3 wire with IEC plug one end and standard 125V plug on other end.

Operating Temp: 0 to 40ºC (32 - 104ºF)

Cooling: Fan cooled whenever AC is connected.

Storage Temp: -40 to 80ºC (-40 – 175ºF)