Strobe Power Supplies

Part No.	PHOTO	Description	CART	Price
WHL A413AHDA-CF	PHOTO	Power Supply Comet Flash 14/ 28 volt, Whelen	ADD	$433.75

The HDA, CF has the capacity for simultaneous flashing, alternate flashing or both. Wing outputs can be disabled when trigger function is engaged.

• A two light mode alternate flashing, produces a combined total of 44 joules to each light.
• A two light mode simultaneous flashing, produces a combined total of 22 joules to each light.
• A three light mode produces 22 joules to each simultaneous light alternating with a third light with a combined total of 44 joules.

Power Consumption: 14-28 Volts. Current draw 7A @ 14VDC, 3.5A @ 28VDC. Length: 5.50"; Width: 5.0"; Heights: 2.37 "; Flash Rate: alternately at 90± 5 FPM, simultaneously at 50± 5 FPM. Shipping Weight: 3 lbs.

RECOMMENDED COMPONENTS

FOR 2 LIGHTS: 1 HD-60 Installation Package.
FOR 3 LIGHTS: 1 HD-90 Installation Package.

---

Part No.	PHOTO	Description	CART	Price
WHL A490 CF	PHOTO	Power Supply Comet Flash 14/ 28 volt, Whelen	ADD	$245.00

Whelen's most compact, single-source power supply produces an accumulated 19 joules of energy.

Power Consumption: 1.7 Amps @ 14 volts DC, .85 Amps @ 28 volts DC; Length: 5.0"; Width; 3.12"; Height; 2.25"; Flash Rate: 50 ± 5 FPM. Shipping Weight 2 lbs

RECOMMENDED COMPONENTS

One A490, T, CF-14-28 power supply per light.

---

Part No.	PHOTO	Description	CART	Price
WHL A490A14-28	PHOTO	Power Supply Strobe 14/ 28 volt, Whelen	ADD	$315.00

The HTS, CF produces an accumulated 34 joules of energy and is adaptable to any voltage between 13 and 30. It can be equipped to flash simultaneously with up to 5 other HTS, CF power supplies by connecting an 18 gauge wire between the synchronization mechanisms in each power supply. An 18 gauge low voltage wire supplies power to each HTS power supply.

Power Consumption *:2.9 Amps @ 14 volts DC, 1.7 Amps @ 28 volts DC; Length: 5.0"; Width: 3.12"; Height: 3.06"; Flash Rate: 50± 5 FPM. Shipping Weight: 2 lbs.

RECOMMENDED COMPONENTS

One A490A, TS, CF Power Supply per light. One HT Installation Package per HTS Power Supply.

*The TS, CF will operate from 13 to 30 volts.