VIEW SHOPPING CART | TRACKING | CONTACT US | POLICY | FREE CATALOG  
JPI Logo

Engine Data Management 730/740/830 Systems

EDM 700/800 Upgradeable and Mountable Horizontally or Vertically

EDM 730/830 TSO’d, STC'd, FAA Approved - EDM 740, Experimental

EDM 730 4,6,7,8,9 Cylinder with All EGT/CHT probes and USB Memory Module

Part No.PHOTODescriptionCARTPrice
JPI EDM730-4C   Engine Data Monitor 730, 4 Cylinder, JP Instruments
Includes 8 probes, 4-EGT and 4-CHT
$1695.00  
JPI EDM730-6C Engine Data Monitor 730, 6 Cylinder, JP Instruments
Includes 12 probes, 6-EGT and 6-CHT
$2350.00  
JPI EDM730-7C   Engine Data Monitor 730, 7 Cylinder, JP Instruments
Includes 14 probes, 7-EGT and 7-CHT
$2550.00  
JPI EDM730-8C   Engine Data Monitor 730, 8 Cylinder, JP Instruments
Includes 16 probes, 8-EGT and 8-CHT
$2895.00  
JPI EDM730-9C   Engine Data Monitor 730, 9 Cylinder, JP Instruments
Includes 18 probes, 9-EGT and 9-CHT
$3150.00  
JPI FF   Fuel Flow Option, for EDM-730
Functions with any Digital Transducer
$675.00  
JPI FFT-201   Fuel Flow Option, with 201 Transducer for EDM-730 $775.00  
JPI FFT-231   Fuel Flow Option, with 231 Transducer for EDM-730 $775.00  
JPI RPM   RPM Option, for EDM-730 $285.00  
JPI TRANS-HI   High Flow Transducer, for EDM-730
For some 9 cyl. Engines ( 6 to 120 GPH )
$980.00  

EDM 830 4,6 Cylinder with All EGT/CHT probes and USB Memory Module

Part No.PHOTODescriptionCARTPrice
JPI EDM830-4C   Engine Data Monitor 830, 4 Cylinder, JP Instruments
Includes 8 probes, 4-EGT and 4-CHT
$3250.00  
JPI EDM830-6C Engine Data Monitor 830, 6 Cylinder, JP Instruments
Includes 12 probes, 6-EGT and 6-CHT
$3650.00  

EDM 740 4,6 Cylinder Experimental with All EGT/CHT probes and USB Memory Module

Part No.PHOTODescriptionCARTPrice
JPI EDM740-4C   Engine Data Monitor 740, 4 Cylinder, JP Instruments $2379.00  
JPI EDM740-6C   Engine Data Monitor 740, 6 Cylinder, JP Instruments $2679.00  

EDM 700/800 Indicator Upgrade

Part No.PHOTODescriptionCARTPrice
JPI EDM UPGRADE   EDM-700/800 Indicator Only Upgrade
Use old system wire harness and EGT/CHT/TIT probes
$1200.00  

Additional Optional Features - Specify at time of order

EDM 730/830 Features:

  • LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder to peak
  • Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate
  • Voltage, For alternator failure, monitored for over and under voltage with alarms
  • Pilot Programmable Hi &Lo alarm limits. ALL programming from front panel
  • All EDM’s TSO’d for quality with a 3 yr. Warranty Electronics and 1yr. Probes
  • Quick response probes, fastest accurate readings, harness and hardware
  • Data Memory, reading once every 2 to 255 seconds. To be down loaded to USB stick
  • EZPlot-1 program for downloading data and plotting data
  • USB down load port built in with memory stick
  • Full color TFT screen 3 inches x 4 inches
  • Fits a standard 3.1" hole
  • Housing off Center
  • Rotates 90 degrees 4 times
  • Fits the standard JPI harness
  • EDM 700/800 upgradeable
  • EZTRENDS®I Computer program, supplied with kit

EDM 740 Functions:

RPM, Manifold Pressure, Horsepower, EGT, Oil Temp, Oil Pressure, Outside Air Temp, Voltage, Gallons per Hour, Required to Destination, Fuel Used, Endurance, Miles per Gallon, Shock Cooling, Gami Spread, Lean of Peak, Memory Stick, Data Recording, EZTrends Graphing

EDM 740 Options:

Primary TIT, Fuel Pressure, Fuel Quantity Left and Right, Amps, Carb Temp, Compressor Discharge

Available Options Include:

Part No.PHOTODescriptionCARTPrice
JPI TIT   Turbine Inlet Temperature, (TIT) for EDM-730/830
Can Monitor 2 Turbines
$165.00  
JPI OTS   Oil Temperature System, for EDM-730/830 $165.00  
JPI OPS   Oil Pressure System, for EDM-730/830 $285.00  
JPI IATCDT   Induction Air, Compressor Temp, and Carb Carburetor Temp (IAT/CDT) for EDM-730-830 $165.00  
JPI EGT-PR   EGT Replacement Probe, for EDM-730/830 $104.00  
JPI CHT-PR   CHT Replacement Probe, for EDM-730/830 $104.00  
JPI CHT-PRS   CHT Small Gasket Probe, for EDM-730/830 $165.00  
JPI PF-CHT   Additional Primary CHT Function, for EDM-730/830 $350.00  
JPI PF-TEMP   Additional Primary Oil Temp Function, for EDM-730/830 $350.00  
JPI PF-TIT   Additional Primary TIT Function, for EDM-730/830 $350.00  
JPI FUEL-HI   High Fuel Flow Option, for EDM-730/830
FT6-8AEXS-LEA-2022 Max Capacity 6 to 240 gph
$1147.00  
JPI 740 EXP   EDM 740 Experimental Package with Fuel Level, Fuel Pressure and Amps, JP Instruments $150.00