Alcor Vernier Mixture Control Cables

• 112" long
• Cut to length
• Red Knob
• Wire end

Part No.	PHOTO	Description	CART	Price
ALC 93882	PHOTO	Mixture Control Cable, PMA'd, 112", Approved for Carbureted Single Engine Aircraft, Alcor	ADD	$116.25

Top of page

Vernier Mixture Control Cables

Vernier Mixture Control Cable

Part No.	PHOTO	Description	CART	Price
CA VMC1	PHOTO	Vernier Mixture Control Cable	ADD	$48.95

Top of page

Mcfarlane Aviation Throttle Control Cables

Part No.	PHOTO	Description	CART	Price
MA MCT100D048		Control Cable, Standard Throttle, Dual, 4ft, for 912/914 Rotax Engines, McFarlane	ADD	$124.95
MA MCT100D048-B		Control Cable, Ball Throttle, Dual, 4ft, for 912/914 Rotax Engines, McFarlane	ADD	$124.95
MA MCT100D072		Control Cable, Standard Throttle, Dual, 6ft, for 912/914 Rotax Engines, McFarlane	ADD	$136.95
MA MCT100D072-B		Control Cable, Ball Throttle, Dual, 6ft, for 912/914 Rotax Engines, McFarlane	ADD	$136.95
MA MCT100D096		Control Cable, Standard Throttle, Dual, 8ft, for 912/914 Rotax Engines, McFarlane	ADD	$139.95
MA MCT100D096-B		Control Cable, Ball Throttle, Dual, 8ft, for 912/914 Rotax Engines, McFarlane	ADD	$139.95
MA MCT100D144		Control Cable, Standard Throttle, Dual, 12ft, for 912/914 Rotax Engines, McFarlane	ADD	$149.95
MA MCT100D144-B		Control Cable, Ball Throttle, Dual, 12ft, for 912/914 Rotax Engines, McFarlane	ADD	$149.95

Innovative design allows a neat, clean installation without a clunky splitter box

• Super-smooth friction lock
• All metal construction
• Teflon lined for smooth, consistent control
• Two knob styles available: Standard or Ball
• Manufactured to the same quality standards as McFarlane's FAA-PMA parts

Specifications:

• Panel Fitting: 1/2-20 UNF x 0.67 inch thread
• Slip Fit Conduit Terminals: 2 each with 1/4-28 UNF x 1.00 inch thread
• Conduit: 0.188 inch OD Teflon lined wound conduit
• Inner Wire: Heavy duty 0.062 inch diameter, 1x7 stainless steel twisted wire per MIL-DTL-87161
• Travel (stroke): 3.75 inch maximum
• Pull: 10 lbs maximum
• Typical Locking Force: 1 to 10 lbs
• Operating Temperature: -65 to 450 F

Top of page

Control Cables

Cable is a Special Order and is Not Returnable. This Sale is Final.

ILLUS Standard 10/32 thread, 1/4-28 ends available. Optional Bulkhead fitting shown.

Cablecraft cables for Quadrants.

Part No.	PHOTO	Description	CART	Price
CC 580700-GG348	PHOTO	Control Cable for Quadrants, Push-Pull 10/32 Both Ends 48", Cablecraft	ADD	$45.00
CC 580700-GG360		Control Cable for Quadrants, Push-Pull, 60", Cablecraft	ADD	$55.00

Same high quality cable mechanics as used in their mixture/prop assemblies. 10-32 threaded ends for easy installations on injectors, carburetors and other assemblies.

---

Designs also include: Solid cable, Friction lock.

All cables are fire resistant with Conduit and inner-member (nonwire) passing FAR 23.1141 2000 fire resistance test.

All installations on privately owned certificated aircraft must be FAA certified, Form 337. Installation should be accomplished by a licensed "A" and/or "P" mechanic. CableCraft has been building aircraft control cables for over 35 years.

Customers include Beech, Bell Helicopter, Bellanca, Boeing, Cessna, Garret, GE, Mooney, Piper and others. Applications for these customers include:

• Propulsion - Throttle controls, fuel shut-off controls, variable vane feedback controls, cable/gearbox systems
• Flight Controls - Rudder trim
• Landing Gear - Emergency gear release, Free fall control assemblies, Landing light cable
• Doors - Latch actuation assemblies, Emergency door cable assemblies, Main entry door pull controls
• Safety Features - Upper deck escape slide cable, deployment actuation cable assemblies, Canopy jettison, Engine safety cable
• Passenger/Crew - Crew seat adjustment controls, Windshield air controls, Seat position indicator controls, Heat and Vent Controls, Window opening mechanisms, Potable water cable.

Top of page