Boeshield T·9 offers excellent penetration and moisture displacement, then dries to a thin waxy coating that far outlasts the others. Easily applied with conventional spray equipment and surprisingly economical to use.

Boeshield T·9 was developed by Boeing Aviation for long term protection of aircraft. Their research proved that none of the Teflon, silicone, or synthetic sprays held up for long when exposed to a corrosive environment. So they engineered a new product designed to penetrate deeply into fasteners and fixtures, displace moisture, and dry to a clean wax film that lubricates and protects all metals for months. It will also loosen rusted parts and will not harm most paints, plastics and vinyls.Boeing Aviation's own corrosion protectant is now available to consumers and FBO's.

Top of page

Stop corrosion in its tracks!

ACF-50 terminates the corrosion process. It penetrates corrosion cells and stops electrolysis. It will not repair damage that has already occurred, nor remove heavy scale associated with severe corrosion. Once treated, the scale will eventually diminish and the corrosion will remain in check. In milder cases of corrosion where there is only a white powder, ACF-50 will change the color of the powder from white to gray and the aluminum will take on a slightly mottled appearance.

As a penetrant:

Use ACF-50 to spray parts, cables, electric motors, hinges, etc., and allow it to soak. ACF-50 has a strong affinity for metal; it cuts through corrosion build-up and loosens frozen parts. It can even make corroded teleflex cables operate like new.

Avionics and electrical components:

ACF-50 will not harm avionics or electrical components. It is ideal for use on bus bars, circuit panels, canon plugs, connectors and antenna bases. Printed circuit boards can be sprayed, as well as rheostats and switches. In many cases, what seems to be a broken rheostat or switch is simply a malfunction due to corrosion and ACF-50 will make these components fully operational again.

Top of page

No. 3 Heavy Duty Rust Inhibitor

Forms a (.0002 in.) waxy film that protects all metals from rust and corrosion (for two years or more) under severe outdoor, moisture, salt and chemical conditions. Inhibits stress corrosion cracking of wings, control surfaces and fuselage. Inhibits corrosion in battery, lavatory, gallery, cargo and bilge areas. Protects wheel wells, wheel landing gear and floats. Flash Point 155° F.

Top of page